Yamaha RX-V3800 Input Select, 81 En, Antenna Level Antenna level U.S.A. and Canada models only

Input Select

Use this feature to reassign digital input/outputs, select the input signal, rename the inputs, or adjust the level of the signal input at each input source.

Input source	Parameter
XM	Antenna Level
(U.S.A. and Canada models	Volume Trim
only)	Rename
TUNER	Volume Trim
	Rename
MULTI CH	Volume Trim
	Rename
	Multi CH Assign
	BGV
PHONO	I/O Assignment
CD	Audio Select
CD-R	Decoder Mode
MD/TAPE	Volume Trim
BD/HD DVD	Rename
DVD
DTV/CBL
DVR
VCR
V-AUX or DOCK	I/O Assignment*
	Audio Select*
	Decoder Mode*
	Volume Trim
	Rename
PC/MCX, NET RADIO or	Volume Trim
USB

Notes

•Some parameters described above may not be available for all input sources and some parameters are only available for specific input sources.

•When iPod is stationed in a Yamaha iPod universal dock (such as YDS-10, sold separately) connected to the DOCK terminal of this unit, “DOCK” appears in the “Input Select” menu instead of “V-AUX”. In such cases, the parameters marked with asterisk (*) in the above table do not appear in the input source parameter menu.

•When you select “NET/USB” as the input source, selected sub input source (PC/MCX, NET RADIO or USB) appears in the Input Select menu. You can set “Volume Trim” for each sub input source separately.

Graphical user interface (GUI) screen

1Set the operation mode selector to DAMP and then press GSET MENU.

The top display appears.

Stereo/Surround	Sound
Input Select	Video
Manual Setup	Basic
Auto Setup	NET/USB
System Memory	Option

2Press 4k / n to select “Input Select” and then press 4h.

	MD/TAPE
Stereo/Surround	BD/HD DVD
Input Select	DVD
Manual Setup	DTV/CBL
Auto Setup	DVR

3Select the desired input source (CD, DVD, etc.) and then press 4h or 4ENTER to

access and adjust.

■Antenna Level (Antenna level)

(U.S.A. and Canada models only)

Use this feature to check the current reception level of the XM Satellite Radio signals (see page 56). For the best reception, adjust the orientation of the antenna of connected Home Dock so that a value of 60% or more is displayed here.

Display status: None, 0 to 100%

Antenna Level

Antenna Level 96%

Volume Trim

Rename

Notes

•“None” is displayed if the Home Dock is not connected to this unit. In this case, check the antenna connections (see page 56).

•The “Antenna Level” parameter cannot be adjusted by using the remote control. Instead, you need to adjust the orientation of the antenna of Home Dock connected to the XM jack of this unit for a better percentage of the reception level.

OPERATION ADVANCED

English

81 En