Yamaha RX-V3800 owner manual 83 En, Rename Rename, Multi CH Assign Multi channel assignment

■Rename (Rename)

Use this feature to change the name of the inputs in the GUI screen or the front panel display menu. (DVD is used as the source component in the following example.)

1Press 4l / h to place the _ (underscore) under the space or character you want to edit.

Decoder Mode			CAPITAL
Volume Trim
Rename		DVD
	OK		RESET

2Press 4ENTER repeatedly to select a character type (CAPITAL/SMALL/FIGURE/ MARK).

3Press 4k / n to select the character you want to use and 4l / h to move to the next one.

•You can use up to 9 characters for each input.

•Press 4n to change the character in the following order, or press 4k to go in the reverse order:

CAPITAL	A to Z, space
SMALL	a to z, space
FIGURE	0 to 9, space
MARK	!, #, %, &, etc.

•Press 4ENTER to switch between character types.

•Repeat steps 1 to 3 to rename each input.

Note

Even if you select “Français”, “Deutsch”, “Español” or “Русский” in “Language” (see page 99), you cannot use accent symbols or cyrillic alphabets for the name of each input.

4Press 4l / hrepeatedly to select “OK” and press 4ENTER when complete.

y

You can also change the name of the input source that appears in the display window (B) on the remote control. Refer to “Changing source names in the display window” on page 110.

Graphical user interface (GUI) screen

■Multi CH Assign

(Multi channel assignment)

Use this feature to set the direction of the signals input into the center, subwoofer and surround channels when a source component is connected to the MULTI CH INPUT jacks.

Input Channels (Input channels)

Use this setting to select the number of channels input from an external decoder (see page 29).

Choice	Description
6ch	Select “6ch” the connected component outputs
	discrete 6-channel audio signals.
8ch	Select “8ch” the connected component outputs
	discrete 8-channel audio signals. Also set “Front
	Input” (see below) to the analog audio jacks at
	which the front left and right channel signals
	output from the connected component are input.

Note

If “Zone2 Amplifier” (page 97) is set to “INT:[SP1]”, “INT:[SP2]” or “INT:Both”, no sound is output from the surround back speakers even if you select “8ch”. In this case, select “6ch” and set the output setting of the external component to 6 channels.

Front Input

(Front left and right channels input jacks)

If you selected “8ch” in “Input Channels”, you can select analog jacks at which front left and right channel signals from an external decoder will be input.

Choices: CD, CD-R, MD/TAPE, BD/HD DVD, DVD, DTV/CBL, DVR, VCR, V-AUX

■BGV (Back ground video)

Use this feature to select the video source played in the background of the sources input at the MULTI CH INPUT jacks.

Choice	Functions
Last	Automatically selects the last selected video
	source as the background video source.
BD/HD DVD,	Selects the corresponding input source as the
DTV/CBL,	background video source.
DVD, DVR,
VCR, V-AUX
Off	Does not play the video source in the
	background.

OPERATION ADVANCED

Note

You can only change the name of the current input source (except for multi channel input sources) using this setting.

English

83 En