Yamaha RX-V3800 40 En, Reviewing the result of the automatic setup, System Memory feature

Optimizing the speaker setting for your listening room (YPAO)

6Once you have selected the desired settings of each parameter, press 4l to return to the previous menu level and then press 4n to select “Start”.

7After the setting of the measurement, start the automatic setup procedure.

Refer to steps 4 to 6 of “Basic procedure of the automatic setup” on page 37 for details.

System Memory feature

You can save multiple result of the automatic setup by using the System Memory feature. See page 100 for details.

■Reviewing the result of the automatic

setup

Use this feature to review the result of the automatic setup.

1Set the operation mode selector to DAMP and then press GSET MENU to turn on the

GUI screen.

2Press 4k / n repeatedly and then 4h to select “Auto Setup”.

Input Select
Manual Setup	Information
Auto Setup	Setup Menu
System Memory	Start
Signal Info.

3Press 4k to select “Information”.

Information	Wiring
Setup Menu	Distance
Start	Size

4Press 4h and then 4n repeatedly to select the desired check items.

		Left	Right
	Front	NRM	NRM
	Center	NRM
Wiring	Sur.	NRM	NRM
	S.Back	NRM	NRM
Distance	PRNS	NRM	NRM
Size	SubWfr	NRM
	Reload:ENTER

Wiring (Speaker wiring)

Displays the polarity of each connected speaker.

•“NRM” appears when the polarity of the connected speaker is normal.

•“REV” appears when the polarity of the connected speaker is reversed.

Note

“–––” appears when no speaker is connected to the corresponding speaker channel.

Distance (Speaker distance)

Displays the speaker distance from the listening position. Press 4l / h to switch the unit to display the value of the each speaker distance.

Note

“–––” appears when no speaker is connected to the corresponding speaker channel.

Size (Speaker size)

Displays the size of the connected speakers. The bass cross over frequency (“Cross”) appears at the bottom of the menu area.

•“LRG” appears when the connected speaker has the ability to reproduce the low-frequency signals effectively.

•“SML” appears when the connected speaker does not have the ability to reproduce the low-frequency signals effectively.

Note

“–––” appears when no speaker is connected to the corresponding speaker channel.

Equalizing (Speaker equalizing)

Displays the result of the adjustment of the frequency responses of each connected speaker.

Note

“–––” appears when no speaker is connected to the corresponding speaker channel.

Level (speaker level)

Displays the speaker output level of the connected speakers.

Note

“–––” appears when no speaker is connected to the corresponding speaker channel.

40 En