Yamaha RX-V3800 Using the remote control, Opening and closing the front panel door, 34 En, Light

Connections

Using the remote control

The remote control transmits a directional infrared ray. Be sure to aim the remote control directly at the remote control sensor on this unit during operation.

Remote control sensor

Approximately 6 m (20 ft) 30 30

2LIGHT

Lights up the remote control buttons and the display window (B).

Display window (B)

Shows the name of the selected input source that you can control.

Infrared window (Q)

Outputs infrared control signals. Aim this window at the component you want to operate.

Transmit indicator (P)

Flashes while the remote control is sending infrared signals.

Operation mode selector (D)

The function of some buttons depends on the operation mode selector position.

AMP

Operates the amplifier function of this unit.

SOURCE

Operates the component selected with an input selector button (see page 106).

TV

Operates the TV assigned to either DTV/CBL or PHONO (see page 105).

Notes

•Do not spill water or other liquids on the remote control.

•Do not drop the remote control.

•Do not leave or store the remote control in the following types of conditions:

–places of high humidity, such as near a bath

–places of high temperatures, such as near a heater or stove

–places of extremely low temperatures

–dusty places

Opening and closing the front panel door

When you want to use the controls behind the front panel door, open the door by gently pressing on the lower part of the panel. Keep the door closed when not using these controls.

To open, press gently on the lower part of the panel.

34 En