Yamaha RX-V3800 owner manual 116 En, Clearing a macro function, a ballpoint pen or similar object

Remote control features

■Clearing a macro function

You can clear the function programmed for a certain macro button.

1Set the operation mode selector to DAMP or DSOURCE and then press MMACRO using

a ballpoint pen or similar object.

“MCR ?” appears in the display window (B) on the remote control.

AMP

SOURCE

TV

or	MACRO
AMP
SOURCE
TV

3Press MMACRO again to exit the macro programming mode.

Notes

•“C;NG” appears in the display window (B) on the remote control if clearing was unsuccessful. In this case, start over from step 2.

•“ERROR” appears in the display window (B) on the remote control if you press more than one button simultaneously.

Note

If you do not complete each of the following steps within 30 seconds, the macro programming mode will be automatically canceled. In this case, start over from step 1.

2Press and hold MCLEAR using a ballpoint pen or similar object, then press the macro button you want to clear for about 3 seconds.

“C;OK” appears in the display window (B) on the remote control if clearing was successful.

MD/TAPE	DVD	BD/HD DVD	PHONO
DTV/CBL	DVR	VCR	V-AUX/DOCK

OFF ON MACRO LEARN CLEAR RENAME

y

•If you continuously want to clear another function, repeat step 2.

•Once you clear a programmed function, the button reverts to the factory setting (or to the manufacturer setting if you have set remote control codes).

116 En