Yamaha RX-V3800 113 En, Programming macro operations, to include in the macro operation in

Remote control features

■Programming macro operations

You can program your own macro and use the macro	3 Press the buttons for the functions you want
programming feature to transmit several remote control	to include in the macro operation in
commands in sequence at the press of a button. Be sure to	sequence.
set up remote control codes or perform learning operations	You can set up to 10 steps (10 functions). After you
before programming the macro.
	have set 10 steps, “FULL” appears and the remote
	control automatically exits the macro mode.
Notes
	Example
• The default macro is not cleared when a new macro is
	Set the input source to DVD → Activate the DVD
programmed for a button. The default macro can be used again
	player → Set the sleep timer
when the programmed macro is cleared.
• It is not possible to add a new signal (macro step) to the default	Step 1 (“MCR 1”): Press DVD.
macro. Programming a macro changes all macro contents.
	Step 2 (“MCR 2”): Press AV POWER.
• We do not recommend programming continuous operations
	Step 3 (“MCR 3”): Press SLEEP.
such as volume control in a macro.
1 Set the operation mode selector to DAMP or	POWER POWER STANDBY POWER

	SOURCE and then press		MACRO using	TV	2
D		M		XM	NET/USB AUDIO SEL SLEEP

a ballpoint pen or similar object.

“MCR ?” appears in the display window (B) on the remote control.

AMP

SOURCE

TV

or	MACRO
AMP
SOURCE

TUNER	CD	CD-R	MULTI CH IN 3
MD/TAPE	DVD	BD/HD DVD	PHONO
DTV/CBL	DVR	1VCR	V-AUX/DOCK

Indicates the number of macro steps entered

Flashes alternately so you can set the next step

TV

	Note
Note
	To change the selected input area, press BSELECT k / n.
If you do not complete each of the following steps within 30
	Pressing the input selector buttons will program a macro step,
seconds, the macro programming mode will be
	whereas BSELECT k / n only changes the selected input
automatically canceled. In this case, start over from step 1.
	area.

2Press the macro button you want to use to operate the macro.

The macro button name (ex. “M;DVD”) and the selected component name (ex. “DVD”) appear alternately in the display window (B) on the remote control.

Note

“AGAIN” appears in the display window (B) if you press a button other than a macro button.

4Press MMACRO again using a ballpoint pen or similar object when the operation sequence you want to program is complete.

Note

“ERROR” appears in the display window (B) if you press more than one button simultaneously.

English

113 En