Yamaha RX-V3800 Selecting audio input jacks, Selecting the Multi CH Input component, 42 En

Playback

Selecting audio input jacks

(AUDIO SELECT)

This unit comes with a variety of input jacks. Use this feature (audio input jack select) to switch the input jack assigned to an input source when more than one jacks are assigned to an input source.

y

•We recommend setting the audio input jack select to “AUTO” in most cases.

•You can adjust the default the audio input jack select of this unit by using “Audio Select” in “Option” (see page 98).

•You can also set the audio input jack select setting in “Audio Select” in “Input Select” (see page 82).

1Rotate the CINPUT selector (or press one of the input selector buttons (1)) to select the desired input source.

2Press DAUDIO SELECT (or 0AUDIO SEL) repeatedly to select the desired Audio

input jack select setting.

Available input sources

NET/USB V-AUX VCR DVR DTV/CBL DVD BD/HD DVD MD/TAPE CD-R CD PHONO MULTI CH TUNER XM

	A . S E L :		A U T O
			Currently selected Audio
			input jack select setting
AUTO	Automatically selects input signals in the
	following order:
	(1) HDMI
	(2)	Digital signals
	(3)	Analog signals
HDMI	Selects only HDMI signals. When HDMI
	signals are not input, no sound is output.
COAX/OPT	Automatically selects input signals in the
	following order:
	(1)	Digital signals input at the COAXIAL jack.
	(2)	Digital signals input at the OPTICAL jack.
	When no signals are input, no sound is output.
ANALOG	Selects only analog signals. If no analog
	signals are input, no sound is output.

Note

This feature is not available when no digital input jack (OPTICAL, COAXIAL and HDMI) are assigned. Use “I/O Assignment” in “Input Select” to reassign the respective input jack (see page 82).

Selecting the MULTI CH INPUT component

Use this feature to select the component connected to the MULTI CH INPUT jacks (see page 29) as the input source.

Rotate the CINPUT selector on the front panel to select MULTI CH (or press 1MULTI CH IN).

y

Use “MULTI CH” menu in “Input Select” to set the parameters for MULTI CH (see page 83).

Note

Sound field programs and the Compressed Music Enhancer mode cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 45).

Using your headphones

Connect a pair of headphones with a stereo analog audio cable plug to the PHONES jack on the front panel.

PURE DIRECT

VOLUME

AUDIO	TONE	REC OUT/					FM/AM	MEMORY		TUNING
SELECT	CONTROL	ZONE2	A/B/C/D/E					MAN'L/AUTO FM		MODE
						EDIT
INPUT			CATEGORY							DISPLAY
			STRAIGHT				ZONE ON/OFF		ZONE CONTROLS
MAIN ZONE					MULTI ZONE
			EFFECT				ZONE 2	ZONE 3
			YPAO	SILENT CINEMA	S VIDEO	VIDEO	L	AUDIO R		OPTICAL
	PROGRAM		OPTIMIZER	PHONES			VIDEO AUX			USB
			MIC

OFF

MASTER

y

When you select a sound field program, SILENT CINEMA mode activates automatically (see page 50).

Notes

•When you connect headphones, no signals are output at the speaker terminals.

•When the component connected to the MULTI CH INPUT jacks of this unit is selected as the input source, only the signals input at the MULTI CH INPUT FRONT jacks are output from the connected headphones.

•All digital multi-channel audio signals (except DSD signals) are mixed down to the left and right headphone channels.

42 En