Yamaha RX-V3800 58 En, All Channel Search mode, A L L C H S E A R C H, Category Search mode

XM™ Satellite Radio tuning

Before performing the following operations, set the operation mode selector on the remote control to DSOURCE and then press 1XM.

■All Channel Search mode

1Press ISEARCH MODE (or GSRCH MODE) repeatedly to select “ALL CH

SEARCH”.

A L L C H S E A R C H

2Press GCATEGORY (or 4A-E/CAT.l / h) repeatedly to change the channel category.

3Press HPRESET/TUNING/CH l / h (or

4PRESET/CH k / n) repeatedly to search for a channel within all channels.

y

You can search for a channel quickly by pressing and

holding HPRESET/TUNING/CH l / h (or

4PRESET/CH k / n).

■Category Search mode

1Press ISEARCH MODE (or GSRCH MODE) repeatedly to select “CAT SEARCH”.

C A T S E A R C H

2Press GCATEGORY (or 4A-E/CAT.l / h) repeatedly to change the channel category.

3Press HPRESET/TUNING/CH l / h (or

4PRESET/CH k / n) repeatedly to search for a channel within the selected channel category.

y

You can search for a channel quickly by pressing and holding HPRESET/TUNING/CH l / h (or 4PRESET/CH k / n).

■Preset Search mode

Prior to selecting a preset channel in the Preset Search mode, you must preset XM Satellite Radio channels. For details, see “Setting the XM™ Satellite Radio preset channels” on page 59.

y

The initial factory setting of all preset channels (A1 to E8) is “[001] Preview”.

1Press ISEARCH MODE (or GSRCH MODE) repeatedly to select “PRESET

SEARCH”.

P R E S E T S E A R C H

2Press GCATEGORY (or 4A-E/CAT.l / h) repeatedly to change the preset channel group (A to E).

3Press HPRESET/TUNING/CH l / h (or

4PRESET/CH k / n) repeatedly to change the preset channel number (1 to 8).

y

You can also select the preset channel number directly by pressing the numeric buttons (1 to 8) on the remote control.

■Direct Number Access mode

1Press GSRCH MODE on the remote control repeatedly to select “ALL CH SEARCH” or “CAT SEARCH”.

A L L C H S E A R C H

or

C A T S E A R C H

58 En