Yamaha RX-V3800 owner manual Saving and recalling the system settings System Memory, 100 En

Saving and recalling the system settings (System Memory)

Use this feature to save up to six of your favorite settings that can be easily recalled when needed. You can save the following system setting parameters:

Saved parameters	Page
“Stereo/Surround” parameters	74
“Volume” parameters	84
(except “Initial Volume”)
“Sound” parameters* (except “EXTD	85
Surround” and “Channel Mute”)
“Video” parameters (except “Short Message”)	89
“Basic” parameters	91
“Front Panel Disp.” parameters	96
“Support Audio”	98
Currently selected sound field program (or the	45, 51
Pure Direct mode)
Tonal quality control settings*	51

*The settings of “Dynamic Range”, “LFE Level”, “Tone Control”, and the tonal quality control for headphones are not saved.

Saving the current system settings

Before performing the following operations, set the operation mode selector on the remote control to DAMP.

■Saving by the NSYSTEM MEMORY

buttons

You can save the system settings stored in “Memory1” to “Memory4” by pressing the corresponding NSYSTEM MEMORY buttons.

Press and hold one of the NSYSTEM MEMORY buttons on the remote control for 4 seconds.

“MEMORY 1 SAVE Done” (example) appears in the front panel display, and then this unit saves the current system setting to the corresponding memory number.

SYSTEM MEMORY

1 2 3 4

Note

If system settings are already saved in the selected memory number, this unit overwrites the old system settings.

■Saving by the SET MENU operation

You can save the system settings stored in “Memory1” to Memory6” by using the “System Memory” menu in “SET MENU”.

1Press GSET MENU on the remote control.

The top menu appears in the GUI.

Stereo/Surround	Sound
Input Select	Video
Manual Setup	Basic
Auto Setup	NET/USB
System Memory	Option

2Press 4k / n repeatedly to select “System Memory” and then press 4h.

The “System Memory” menu appears in the GUI.

	Current
	Memory1
Load	Memory2
Save	Memory3
	Memory4

3Press 4k / n to select “Save” and then press

4h.

The following menu appears in the GUI.

	Sci-Fi
	SpeakerCH 4/3/0.1
Current	LFE Level	0dB
Memory1	D-Range	MAX
	PEQ YPAO Natural

Memory2

Current system parameters

100 En