Extron electronic ISM 824 Muting or unmuting output signals, Output video and audio signal muting

ISM 824 Multiswitcher Software, cont’d

Muting or unmuting output signals

To mute or unmute output video signals, audio signals, or both do the following:

1. Click on the radio button for the type of mute desired; video and audio, video only, or audio only (see figure 5-20). The button fills green. If the video only or audio only button is selected, the other column becomes grayed out and is non selectable.

NOnly one button can be selected at a time to make changes. Repeat steps 1 and 2 for the other buttons as desired. Output mute selections remain in effect until they are deselected (unmuted).

Figure 5-20 — Output video and audio signal muting

2.	Click in the video box or audio box against the output for which the signals
	are to be muted. A check mark appears in the box.

NIf muting video and audio output together, clicking in one of the boxes makes check marks appear in both boxes.

3.	To unmute an output signal, click the video/audio button, then click the
	checked signal box (video, audio, or both) against the desired output. The
	check marks disappear.

Saving a preset

To save the current configuration as a preset, do the following:

1. With “Current Configuration” visible in the I/O presets field, click Save As. This opens a separate window, I/O Preset (see figure 5-21).

2. In the I/O Preset window select a number from the drop down box. The Preset Name field will auto fill with “Preset xx”, where “xx”is the number selected (see figure 5-21).

Figure 5-21 — Click “ Save As” to open the I/O Preset selection window

3. Click OK, and the current configuration is now saved under that preset number. The I/O Preset window closes

5-14 ISM 824 Integration Scaling Multiswitcher • ISM 824 Multiswitcher Software