Extron electronic ISM 824 Slot output card configuration, Each configurable card has its own

3. Enter a suitable name (maximum 11 characters, including spaces) in the name field.

4. Click Accept to name the preset. The page refreshes and the selected button shows the entered name. The Select Preset... button reverts to Save Preset

NClick Cancel at any point before saving, to exit without saving any changes.

Slot (output card) configuration

There are four slots, numbered 1 to 4, into which an optional output card can be installed. Depending on the card type installed, input and user presets can be saved and recalled on this page. Picture control, input sampling and limited output and advanced configurations can also be made from this page.

The cards that can be configured are: Universal Scaler, Video Scaler, and Scan Converter cards. Wideband cards and pass-through outputs cannot be configured using this Ethernet page. For any particular slot/output card combination, the cards that can be configured are shown in blue text on the left side of the User Control page. Other (not configurable) outputs are shown in black text.

Each configurable card has its own page.

Universal Scaler — ISM RGB

The page for the Universal Scaler is shown below:

Figure 6-17 — Universal Scaler output card configuration screen

On the top of this page, the input number that is currently tied to the card’s output

tie is shown (see figure 6-17).

ISM 824 Integration Scaling Multiswitcher • HTML Operation 6-17