Extron electronic ISM 824 Setting up e-mail alerts, Click Edit. The Edit button changes to Save

For the e-mail settings and for each row of the e-mail notification settings, click Edit to make the fields available for editing (see figure 6-7). The button changes to Save. After editing the settings associated with the Edit/Save button, click Save.

Figure 6-7 — Email Alerts page

Setting up e-mail alerts

Set the ISM to send e-mail alerts when settings are changed as follows:

1. On the Email Alerts screen, click Edit located to the right of the Mail IP Address and Domain Name fields. The button changes to Save.

2. If your domain user name has a password assigned, enter it.

3. Click Save.

To set up e-mail addresses for notification, do the following for each recipient of e-mail alerts:

1.	Click Edit. The Edit button changes to Save.
2.	Enter the e-mail address of the recipient, and the file name on the host PC
	(*.eml extension) that contains the message.
3.	Click Save to save the changes. The Save button changes back to Edit.

Setting up SMTP authorization

To set the ISM 824 to require SMTP authorization before accepting any e-mail, do the following:

1.	Click Edit. The button changes to Save.
2.	Check the SMTP Authorization Required check box, located below the
	Domain Name field. This enables the User Name and Password fields below
	the check box.

ISM 824 Integration Scaling Multiswitcher • HTML Operation 6-9