Port, Click the Configuration tab | Extron electronic ISM 824

2.	Click the Firmware link (figure 6-9).

Figure 6-9 — Location of firmware upgrade files on the Extron web site

3. Select the ISM 824 firmware file to download and save it to the host PC.

NValid firmware files must have the file extension “.S19”. Any other file extension is not a firmware upgrade.

4.	In the Windows Explorer or other file browser, double-click the downloaded
	executable (*.exe) file) to self-extract the firmware file to the PC.
5.	If not done already, connect the PC to the ISM 824 via the switcher’s LAN
	port.
6.	Access the ISM 824 using HTML pages as described on page 6-2.
7.	Click the Configuration tab.
8.	Click the Firmware Upgrade link (see figure 6-9).
9.	Click Browse. An open file window appears.

10. Navigate to the folder where the saved firmware upgrade file resides. Select the file.

NValid firmware files must have the file extension “.S19”. Any other file extension is not a firmware upgrade.

The original factory-installed firmware is permanently available on the ISM 824 switcher. If the attempted firmware upload fails for any reason, the device automatically reverts to the factory-installed firmware.

11. Click Open.

12. Click Upload on the Firmware Upgrade page. The firmware uploads to the ISM 824 and the device restarts. This may a few minutes.

ISM 824 Integration Scaling Multiswitcher • HTML Operation 6-11

Image 141

Extron electronic manual Port, Access the ISM 824 using Html pages as described on, Click the Configuration tab

Contents

ISM Integration Scaling Multiswitcher Consignes de Sécurité Français Safety Instructions EnglishSicherheitsanleitungen Deutsch Instrucciones de seguridad Español FCC Class a Notice ISM 824 Integration Scaling Multiswitcher Ii ISM 824 Integration Scaling Multiswitcher Pass-through outputs Connect video ISM 824 Integration Scaling Multiswitcher Quick Start QS-1 Quick Start ISM 824 Integration Scaling Multiswitcher QS-2 ISM 824 Integration Scaling Multiswitcher Quick StartMaking input to output ties Presets Picture adjustmentsISM 824 Integration Scaling Multiswitcher Quick Start QS-3 OUT #5 QS-4 ISM 824 Integration Scaling Multiswitcher Quick Start Front panel security lockout Executive modeISM 824 Menu System Menu button The Menu Table of Contents Table of Contents, cont’d Page Table of Contents, cont’d Sys tems s ettings page IP Settings fields Rev. a One About the Integration Scaling Multiswitcher ISM 824 Integration Scaling Multiswitcher IntroductionAbout this Manual Typical ISM 824 application Definitions Introduction, cont’d Inputs FeaturesOutputs Tie any input to any or all outputs Universal Scaler card ISM RGB Optional Output Card Features Video Scaler card ISM VS Dual Output Wideband card ISM 2WBSingle Output Wideband card ISM 1WB Introduction, cont’d Two UL/Safety Requirements Installationstallation, cont’dImportant safety instructions ISM 824 Integration Scaling Multiswitcher Installation Tabletop placement Mounting the SwitcherUL requirements for rack mounted devices Rack mounting Installation, cont’d Rear Panel Features and ConnectionPower and control connections Cabling and RJ-45 connector wiring Choosing a network cableTerminating the network cable Input connections for various video formats Input connections Balanced Stereo Output Output connections Optional output card connections Video output connectionsAudio output connections Installing the optional output cards PlaceIf applicable, repeat for any other output cards Cover Three Input and output buttons Front Panel Features Control buttons Control selection buttons These four buttonsEnter button The Enter button flashes green Operation and Setup, cont’d Powering Up Default display cycleLCD begins the default display cycle Making input to output ties Front Panel OperationVideo only green Green video only Press and release the Enter button figure An example of creating a set of video and audio ties Press the View button lights red Viewing ties Press and release the Esc button see -8. The View button Adding ties to existing ties Removing ties Press View and observe the LCD display see figurePress and release the Esc button see -12. The View button Another video input can now be tied to outputs 2 Press Esc to clear View and reset the LCD Press and release the Esc button see -16. The View button Replacing ties Input/Output grouping View V=7-22-3-- Ties A=2388-33 An example of creating a set of I/O groups 10001010 =2388-33 Press Esc to clear all pending changes and reset the LCDVI EW V=7-22-3 Muting an output Viewing and setting the RGB delay Viewing the RGB delayUnmuting an output Changing the RGB delay OUT #3 RGB Delay Input audio level gain and output audio volume Viewing input audio level and output audio volumeGain = See -26. The range is -18 dB to +24 dB Adjusting input audio level and output audio volume Presets Saving a presetOverview Recalling a preset Save Preset #11 Color/Tint Picture adjustmentsBrightness Contrast Adjusting the picture brightness/contrast Adjusting the picture color/tint Adjusting the picture detail Press the Esc button to clear all button and reset the LCDBRT OUT #5 Adjusting the picture position Adjusting the picture sizeCurrent size setting see -37 for that output =1024 Adjusting the picture zoom Front panel security lockout Executive modes Background illumination settings 40 Executive Mode 2 initiation and exit method Auto Image menu ISM 824 Menu System Input Conguration Input configuration menu Universal Scaler configuration menu Output card configuration menu ScalerUniversal To adjust the H pixel value, and rotate Input Setup submenuRight encoder to adjust the V line value Select Output submenu Output Configuration Scaler boards Output Config submenu Press Menu to go to the next submenu User Presets Press Next to return to the upper level Output Config. menuUser Presets submenu Press Next to return to the User Preset menu Split Color Bars Advanced Config submenuSplit Grayscale Aspect ratio ISM 824 Integration Default 49 Video Scaler output resolution/refresh rate table User Presets Within this submenu, up to 3 presets can be saved or erasedAdvanced Config Adjusted. Default setting is Input View Comm Settings menu Editing the communication settings System Reset Menu Exit menuScreen. Use this menu to exit from the device Reset Mode Comparison Summary Resetting the Unit with the Reset Button Four RS-232/RS-422 Link Front Panel Configuration PortPin RS-232 Function RS-422 Default address SymbolsEthernet Link Ethernet connection ISM 824 specific symbol definitions SIS Programming and Control, cont’dX5 = Power-up Switcher-Initiated MessagesInput selection Input and output video type Reconfig Auto ImageAuto Memory Host-to-Switcher Instructions Switcher Error ResponsesUsing the Command/Response Tables Programming Command/Response Table for SIS CommandsControl, cont’d OutX@ InX! RGB TypX!*X# @ $RprX4 SprX4 @Vmt1 @*1B@*0B @Vmt0 Mut X5! X5! X5 X5! X5! X5X! ...Vid Vgp X4Out*X! X Inf X\X\X\X\ \X\X\X\\ X\ X\ Multiswitcher SIS Programming and Control Front panel lockout executive modeX4*,X4 ZpxX5 ZpgX4@*X$ @%2AX$ @HstX!*X$ @*X% @%2AX% @VstX!*X% @ApxX!*X 12*X@*X* #13*X@*X # @AlnX!*X @*X1%Y @%2AX1% Y @BrtX!*X1% @*X1% @%2AX1% @ConX!*X1%@+Y @BrtX!*X1% @-Y @BrtX!*X1% EscX@,X1*X1*X1&*X1&XY WX@,X1%2AX1%2AX1 @ZomX!*X5$*X1&*X1X1*X1*X1&*X1 @*X2!*X2@ = @%2AX2!%2AX2@ = RteX@*X2!*X2@ @RprX@*X2 @*X2@SprX@*X2 @*X2% @%2AX2% @RprX2% @*1M Video Scaler ISM VS Output@*0M @ImgX @VphX!*X1 @HszX!*X1@VszX!*X1 @*X\# @*X2!*X2@ =@Pol X\ @*X2% @ Frz1 @FlmX@Blu1 16*X@*X1# @ImgX! *1 @*X1% @%2AX1% @BlbX!*X1%@ImgX! *0 Bottom blanking Symbol definitions Command/Response Table for IP SIS CommandsX7 = X7$ = IptX7@ IpnX7X7# IpzX7$ EX8!,X8#,X8$,X8$, ... X8$EM X8@X8#,X8$ X8$ Five Installation from the CD-ROM Installing the softwareISM 824 Windows Control Program Extron software CD window appears figure Download Center Web Installation from the Web site ISM 824 Multiswitcher Software, cont’d Using the softwareIf connecting by TCP/IP Extron ISM 824 Control Program main window -5 appears If connecting by RS-232 Control program menus and pages Menu featuresFile Tools Data tracer window 10 ISM 824 I/O Group Settings menus − all groups cleared 11 ISM 824 I/O grouping completed 13 ISM 824 Unit Settings menus − IP and RS-232 windows 15 Firmware Loader window with selected firmware file Window Extron Firmware Loader appears ISM 824 Windows Control program Help Select the Video/audio mode Follow all or Breakaway Creating a tieRemoving a tie 20 Output video and audio signal muting Muting or unmuting output signals Settings 22 Recalling a preset Creating or editing input and output names Configuring the input video signal type Audio Settings Setting the RBG delay Adjusting the input gain and attenuation Adjusting the output volume levelPress Enter. The output’s volume is set to that level Create an input to output tie Output Cards Making picture adjustments Selecting an aspect ratioSelecting a test pattern Saving input presets Saving or recalling user presetsRecalling an input preset Deselecting or re-selecting auto memory Freezing an image Starting auto image Making input to output ties Setting top and bottom blanking values Recalling an input preset Button Label Generator Using the Button Label Generator software 34 Remove the button cap to replace the label Replacing the button labels ISM 824 Multiswitcher Software, cont’d Html Operation ISM 824 Integration Scaling Multiswitcher Html Operation To access the ISM 824 using Html pages do the followingDownloading the Startup Start the Web browser program System Status System Status System Settings page IP Settings fields Configuration PagesHtml Operation, cont’d Unit Name field IP Address field Dhcp radio buttonsGateway IP Address field Subnet Mask field System Settings page Date/Time Settings fields ISM SettingsClick the desired value RGB delay Input configuration Passwords Executive modeEmail Alerts Setting up Smtp authorization Setting up e-mail alertsClick Edit. The Edit button changes to Save Eml extension that contains the message Both a user name and a password must be specified Firmware Upgrade Click the Configuration tab Access the ISM 824 using Html pages as described onClick the Firmware Upgrade link see figure Port Enter the new directory name in the Dir/ field File Management User Control Control Pages 12 Click in an output field to see the drop down list 13 A/V mute buttons status according to signal type 14 I/O Presets Each configurable card has its own Slot output card configurationUniversal Scaler ISM RGB For the Universal Scaler is shown below User and input presets can be saved and/or recalled For the Video Scaler is shown below Video Scaler ISM VS Space spaces are accepted in names + ~ , @ = ‘ ’ semicolon Special Characters AAppendix a Ping to determine Extron IP address Ethernet Connection Ping to determine Web IP address Connect as a Telnet client Telnet tips Ethernet Connection, cont’dOpen Escape character and Esc key Set carriage return-line feed Local echoClose Quit Gateways Subnetting a PrimerLocal and remote devices IP addresses and octets Determining whether devices are on the same subnet Unmasked octets are compared indicated by ? in figure A-6Masked octets are not compared indicated by X in figure A-6 Ethernet Connection, cont’d AppendixBB ReferenceInformation,co t’d Specifications To 1.0 Vp-p Vp-p for Y of component video50 Hz, 60 Hz, 72 Hz, 96 Hz, 100 Hz, or 120 Hz Scaled RGBHV, RGBS, RGsB, HD digital component video YUV Reference Information, cont’d ARP, Icmp ping, TCP/IP, Telnet, Http Extron’s control/configuration program for WindowsGateway = Dhcp = off Accessories Part Numbers and AccessoriesISM 824 part number Included parts Japan Asia Japan Extron Electronics. All rights reserved