Extron electronic ISM 824 manual Save Preset #11, Recalling a preset

Step 3.

Press and release the desired input or output button.

INPUTS

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

OUTPUTS

The Selected button blinks red.

C O N T R O L

ENTER PRESET VIEW ESC

The Enter and Preset buttons flash red.

The LCD shows the selected preset number.

SAVE

PRESET #11

Step 4.

Press and release the

Enter button to save the preset.

C O N T R O L

ENTER PRESET VIEW ESC

All lights extinguish and the LCD resets.

Figure 3-28 — Steps 3 and 4 for saving a preset

4. Press the Enter button. All lights extinguish and the preset (the current configuration) is saved.

Recalling a preset

To recall a preset do the following:

1. Press the Esc button to clear all pending changes and reset the LCD.

2. Press and release the Preset button. The Preset button lights red, and input and output buttons with previously saved presets light red. The LCD panel shows the preset recall mode (see figure 3-29).

NIf no buttons are pressed for 30 seconds after step 2, the Preset mode times out, and all buttons extinguish.

Step 1.

Press the Esc button to clear all selections.

Step 2.

Press and release the Preset button. The button lights red.

	C O N T R O L			C O N T R O L		RECALL
ENTER	PRESET VIEW	ESC	ENTER	PRESET VIEW	ESC	PRESET #00
						N The LCD shows the Preset
						recall mode.

	The Esc button
	flashes green once. The input and output buttons with saved
	presets assigned light red.
Figure 3-29 — Steps 1 and 2 for recalling a preset
3.	Press and release the desired saved preset button (input or output) to recall.

The selected button and the Enter button flash red. The LCD shows the selected preset number (see figure 3-30).

NInput buttons have preset addresses 1 through 8, output buttons have preset addresses 9 through 16.

4. Press the Enter button. All lights extinguish (except Video and Audio) and the preset is recalled and becomes the current configuration.

ISM 824 Integration Scaling Multiswitcher • Operation and Setup 3-21