ARP, Icmp ping, TCP/IP, Telnet, Http | Extron electronic ISM 824

Ethernet protocol	ARP, ICMP (ping), TCP/IP, Telnet, HTTP
Default settings	Link speed and duplex level = autodetected
	IP address = 192.168.254.254
	Subnet mask = 255.255.0.0
	Gateway = 0.0.0.0
	DHCP = off
Program control	Extron’s control/configuration program for Windows®
	Extron’s Simple Instruction Set (SIS™)
	Microsoft® Internet Explorer ver. 6 or higher, Netscape Navigator, Telnet

General

Power	100 VAC to 240 VAC, 50/60 Hz, 30 watts, internal
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
	Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Forced air, left to right (as viewed from the front panel)
Rack mount	Yes
Enclosure type	Metal
Enclosure dimensions	5.25” H x 17.5” W x 11.2” D (3U high, full rack wide)
	13.3 cm H x 44.4 cm W x 28.4 cm D
	(Depth excludes connectors and knobs. Width excludes rack ears.)
Product weight
Main unit	14 lbs (6.3 kg)
Shipping weight
Main unit	21 lbs (10 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Listings	UL, CUL
Compliances	CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF	30,000 hours
Warranty	3 years parts and labor

NAll nominal levels are at ±10%.

NSpecifications are subject to change without notice.

ISM 824 Integrated Scaling Multiswitcher • Reference Information

B-5

Image 163

Extron electronic ISM 824 ARP, Icmp ping, TCP/IP, Telnet, Http, Gateway =, Dhcp = off, Extron’s Simple Instruction Set SIS

Contents

ISM Integration Scaling Multiswitcher Instrucciones de seguridad Español Safety Instructions EnglishConsignes de Sécurité Français Sicherheitsanleitungen Deutsch FCC Class a Notice ISM 824 Integration Scaling Multiswitcher Ii ISM 824 Integration Scaling Multiswitcher Pass-through outputs Connect video ISM 824 Integration Scaling Multiswitcher Quick Start QS-1 QS-2 ISM 824 Integration Scaling Multiswitcher Quick Start Quick Start ISM 824 Integration Scaling MultiswitcherMaking input to output ties OUT #5 Picture adjustmentsPresets ISM 824 Integration Scaling Multiswitcher Quick Start QS-3 Menu button The Menu Front panel security lockout Executive modeQS-4 ISM 824 Integration Scaling Multiswitcher Quick Start ISM 824 Menu System Table of Contents Table of Contents, cont’d Page Table of Contents, cont’d Sys tems s ettings page IP Settings fields Rev. a One ISM 824 Integration Scaling Multiswitcher Introduction About the Integration Scaling MultiswitcherAbout this Manual Typical ISM 824 application Definitions Introduction, cont’d Tie any input to any or all outputs FeaturesInputs Outputs Universal Scaler card ISM RGB Optional Output Card Features Dual Output Wideband card ISM 2WB Video Scaler card ISM VSSingle Output Wideband card ISM 1WB Introduction, cont’d Two ISM 824 Integration Scaling Multiswitcher Installation Installationstallation, cont’dUL/Safety Requirements Important safety instructions Rack mounting Mounting the SwitcherTabletop placement UL requirements for rack mounted devices Rear Panel Features and Connection Installation, cont’dPower and control connections Choosing a network cable Cabling and RJ-45 connector wiringTerminating the network cable Input connections for various video formats Input connections Balanced Stereo Output Output connections Video output connections Optional output card connectionsAudio output connections Place Installing the optional output cardsIf applicable, repeat for any other output cards Cover Three Input and output buttons Front Panel Features Control selection buttons These four buttons Control buttonsEnter button The Enter button flashes green Operation and Setup, cont’d Default display cycle Powering UpLCD begins the default display cycle Green video only Front Panel OperationMaking input to output ties Video only green Press and release the Enter button figure An example of creating a set of video and audio ties Press the View button lights red Viewing ties Press and release the Esc button see -8. The View button Adding ties to existing ties Press View and observe the LCD display see figure Removing tiesPress and release the Esc button see -12. The View button Another video input can now be tied to outputs 2 Press Esc to clear View and reset the LCD Press and release the Esc button see -16. The View button Replacing ties Input/Output grouping View V=7-22-3-- Ties A=2388-33 An example of creating a set of I/O groups 10001010 Muting an output Press Esc to clear all pending changes and reset the LCD=2388-33 VI EW V=7-22-3 Viewing the RGB delay Viewing and setting the RGB delayUnmuting an output Changing the RGB delay OUT #3 RGB Delay Viewing input audio level and output audio volume Input audio level gain and output audio volumeGain = See -26. The range is -18 dB to +24 dB Adjusting input audio level and output audio volume Saving a preset PresetsOverview Recalling a preset Save Preset #11 Contrast Picture adjustmentsColor/Tint Brightness Adjusting the picture brightness/contrast Adjusting the picture color/tint Press the Esc button to clear all button and reset the LCD Adjusting the picture detailBRT OUT #5 Adjusting the picture size Adjusting the picture positionCurrent size setting see -37 for that output =1024 Adjusting the picture zoom Front panel security lockout Executive modes Background illumination settings 40 Executive Mode 2 initiation and exit method Auto Image menu ISM 824 Menu System Input Conguration Input configuration menu Universal Scaler configuration menu Output card configuration menu ScalerUniversal Select Output submenu Input Setup submenuTo adjust the H pixel value, and rotate Right encoder to adjust the V line value Output Configuration Scaler boards Output Config submenu Press Next to return to the User Preset menu Press Next to return to the upper level Output Config. menuPress Menu to go to the next submenu User Presets User Presets submenu Aspect ratio Advanced Config submenuSplit Color Bars Split Grayscale ISM 824 Integration Default 49 Video Scaler output resolution/refresh rate table Within this submenu, up to 3 presets can be saved or erased User PresetsAdvanced Config Adjusted. Default setting is Input View Comm Settings menu Editing the communication settings Exit menu System Reset MenuScreen. Use this menu to exit from the device Reset Mode Comparison Summary Resetting the Unit with the Reset Button Four RS-232 Function RS-422 Front Panel Configuration PortRS-232/RS-422 Link Pin Ethernet connection SymbolsDefault address Ethernet Link SIS Programming and Control, cont’d ISM 824 specific symbol definitionsX5 = Input and output video type Switcher-Initiated MessagesPower-up Input selection Auto Image ReconfigAuto Memory Switcher Error Responses Host-to-Switcher InstructionsUsing the Command/Response Tables OutX@ InX! RGB Command/Response Table for SIS CommandsProgramming Control, cont’d SprX4 @ $TypX!*X# RprX4 @Vmt0 @*1B@Vmt1 @*0B Vgp X4Out*X! X X5! X5! X5Mut X5! X5! X5 X! ...Vid \X\X\X\ Inf X\X\X\X\\ X\ X\ Programming and Control Front panel lockout executive mode Multiswitcher SISX4*,X4 @*X% @%2AX% @VstX!*X% ZpgX4ZpxX5 @*X$ @%2AX$ @HstX!*X$ @AlnX!*X 12*X@*X* #@ApxX!*X 13*X@*X # @-Y @BrtX!*X1% @*X1% @%2AX1% @ConX!*X1%@*X1%Y @%2AX1% Y @BrtX!*X1% @+Y @BrtX!*X1% @*X2!*X2@ = @%2AX2!%2AX2@ = RteX@*X2!*X2@ @ZomX!*X5$*X1&*X1EscX@,X1*X1*X1&*X1&XY WX@,X1%2AX1%2AX1 X1*X1*X1&*X1 @*X2% @%2AX2% @RprX2% @*X2@RprX@*X2 @SprX@*X2 @ImgX Video Scaler ISM VS Output@*1M @*0M @HszX!*X1 @VphX!*X1@VszX!*X1 @*X2% @*X2!*X2@ =@*X\# @Pol X\ 16*X@*X1# @FlmX@ Frz1 @Blu1 Bottom blanking @*X1% @%2AX1% @BlbX!*X1%@ImgX! *1 @ImgX! *0 X7$ = Command/Response Table for IP SIS CommandsSymbol definitions X7 = IpzX7$ IpnX7IptX7@ X7# X8$ X8@EX8!,X8#,X8$,X8$, ... X8$EM X8#,X8$ Five Extron software CD window appears figure Installing the softwareInstallation from the CD-ROM ISM 824 Windows Control Program Download Center Web Installation from the Web site Using the software ISM 824 Multiswitcher Software, cont’dIf connecting by TCP/IP Extron ISM 824 Control Program main window -5 appears If connecting by RS-232 Tools Menu featuresControl program menus and pages File Data tracer window 10 ISM 824 I/O Group Settings menus − all groups cleared 11 ISM 824 I/O grouping completed 13 ISM 824 Unit Settings menus − IP and RS-232 windows 15 Firmware Loader window with selected firmware file Window Extron Firmware Loader appears ISM 824 Windows Control program Help Creating a tie Select the Video/audio mode Follow all or BreakawayRemoving a tie 20 Output video and audio signal muting Muting or unmuting output signals Settings 22 Recalling a preset Creating or editing input and output names Configuring the input video signal type Audio Settings Setting the RBG delay Adjusting the output volume level Adjusting the input gain and attenuationPress Enter. The output’s volume is set to that level Create an input to output tie Output Cards Selecting an aspect ratio Making picture adjustmentsSelecting a test pattern Deselecting or re-selecting auto memory Saving or recalling user presetsSaving input presets Recalling an input preset Freezing an image Starting auto image Making input to output ties Setting top and bottom blanking values Recalling an input preset Button Label Generator Using the Button Label Generator software 34 Remove the button cap to replace the label Replacing the button labels ISM 824 Multiswitcher Software, cont’d Html Operation Start the Web browser program To access the ISM 824 using Html pages do the followingISM 824 Integration Scaling Multiswitcher Html Operation Downloading the Startup System Status System Status Unit Name field Configuration PagesSystem Settings page IP Settings fields Html Operation, cont’d Subnet Mask field Dhcp radio buttonsIP Address field Gateway IP Address field ISM Settings System Settings page Date/Time Settings fieldsClick the desired value RGB delay Input configuration Executive mode PasswordsEmail Alerts Eml extension that contains the message Setting up e-mail alertsSetting up Smtp authorization Click Edit. The Edit button changes to Save Both a user name and a password must be specified Firmware Upgrade Port Access the ISM 824 using Html pages as described onClick the Configuration tab Click the Firmware Upgrade link see figure Enter the new directory name in the Dir/ field File Management User Control Control Pages 12 Click in an output field to see the drop down list 13 A/V mute buttons status according to signal type 14 I/O Presets For the Universal Scaler is shown below Slot output card configurationEach configurable card has its own Universal Scaler ISM RGB User and input presets can be saved and/or recalled For the Video Scaler is shown below Video Scaler ISM VS Space spaces are accepted in names + ~ , @ = ‘ ’ semicolon Special Characters AAppendix a Ping to determine Extron IP address Ethernet Connection Ping to determine Web IP address Connect as a Telnet client Escape character and Esc key Ethernet Connection, cont’dTelnet tips Open Quit Local echoSet carriage return-line feed Close IP addresses and octets Subnetting a PrimerGateways Local and remote devices Unmasked octets are compared indicated by ? in figure A-6 Determining whether devices are on the same subnetMasked octets are not compared indicated by X in figure A-6 Ethernet Connection, cont’d AppendixBB ReferenceInformation,co t’d Specifications Scaled RGBHV, RGBS, RGsB, HD digital component video YUV Vp-p for Y of component videoTo 1.0 Vp-p 50 Hz, 60 Hz, 72 Hz, 96 Hz, 100 Hz, or 120 Hz Reference Information, cont’d Dhcp = off Extron’s control/configuration program for WindowsARP, Icmp ping, TCP/IP, Telnet, Http Gateway = Included parts Part Numbers and AccessoriesAccessories ISM 824 part number Japan Asia Japan Extron Electronics. All rights reserved