System Reset Menu, Exit menu | Extron electronic ISM 824 manual

System Reset Menu

This fifth menu level is reached by pressing the Menu button five times from the default display cycle, or until the System Reset menu is shown in on the LCD screen. Use this menu to reset the ISM and any installed output cards to default values. All existing ties are broken.

To reset the ISM 824 system do the following:

1. Press the Next button. The LCD displays “Press DETAIL to reset”, and the Detail button flashes (see figure 3-51).

Default

Cycle

30 sec.

Auto

Image

Menu

Input

Configuration

Menu

Output Card

Configuration

Menu

View Comm

Settings

Menu

		Next
System Reset		Next
Menu

Press DETAIL

to Reset

	COLOR/	BRIGHT/	DETAIL	POSITION	SIZE	ZOOM
	TINT	CONT

PICTURE ADJUSTMENTS

Step 2.

Press the Detail button. The button extinguishes and the LCD changes.

	COLOR/	BRIGHT/	DETAIL	POSITION	SIZE	ZOOM
	TINT	CONT

PICTURE ADJUSTMENTS

Resetting...	Default
Please wait...	Cycle

Step 1.

Press Next. The Detail button flashes green, and the LCD changes.

NAfter the unit has reset, it returns to the default display cycle.

Figure 3-51 — System Reset menu and operation

2. Press the Detail button. The button extinguishes, and the LCD displays

“Resetting...Please wait...”. When resetting is complete the ISM reverts to the default display cycle.

Exit menu

The final menu level is reached by pressing the Menu button six times from the default display cycle, or until the menu is shown in on the LCD

screen. Use this menu to exit from the device

Menu’s and revert the to the display cycle.

From the Exit menu (figure 3-52), press the Next button to return to the default display cycle, or press the Menu button to go to the Auto Image menu.

Figure 3-52 — Exit menu flowchart

Default

Cycle

30 sec.

Auto

Image

Menu

Input

Configuration

Menu
Output Card
Configuration
Menu
View Comm
Settings
Menu
System Reset
Menu
Menu
Press NEXT	Next	Default
Press NEXT		Default
to Exit		Cycle

ISM 824 Integration Scaling Multiswitcher • Operation and Setup 3-43

Image 75

Extron electronic ISM 824 manual System Reset Menu, Exit menu, Screen. Use this menu to exit from the device

Contents

ISM Integration Scaling Multiswitcher Instrucciones de seguridad Español Safety Instructions EnglishConsignes de Sécurité Français Sicherheitsanleitungen Deutsch FCC Class a Notice ISM 824 Integration Scaling Multiswitcher Ii ISM 824 Integration Scaling Multiswitcher Pass-through outputs Connect video ISM 824 Integration Scaling Multiswitcher Quick Start QS-1 Quick Start ISM 824 Integration Scaling Multiswitcher QS-2 ISM 824 Integration Scaling Multiswitcher Quick StartMaking input to output ties OUT #5 Picture adjustmentsPresets ISM 824 Integration Scaling Multiswitcher Quick Start QS-3 Menu button The Menu Front panel security lockout Executive modeQS-4 ISM 824 Integration Scaling Multiswitcher Quick Start ISM 824 Menu System Table of Contents Table of Contents, cont’d Page Table of Contents, cont’d Sys tems s ettings page IP Settings fields Rev. a One About the Integration Scaling Multiswitcher ISM 824 Integration Scaling Multiswitcher IntroductionAbout this Manual Typical ISM 824 application Definitions Introduction, cont’d Tie any input to any or all outputs FeaturesInputs Outputs Universal Scaler card ISM RGB Optional Output Card Features Video Scaler card ISM VS Dual Output Wideband card ISM 2WBSingle Output Wideband card ISM 1WB Introduction, cont’d Two ISM 824 Integration Scaling Multiswitcher Installation Installationstallation, cont’dUL/Safety Requirements Important safety instructions Rack mounting Mounting the SwitcherTabletop placement UL requirements for rack mounted devices Installation, cont’d Rear Panel Features and ConnectionPower and control connections Cabling and RJ-45 connector wiring Choosing a network cableTerminating the network cable Input connections for various video formats Input connections Balanced Stereo Output Output connections Optional output card connections Video output connectionsAudio output connections Installing the optional output cards PlaceIf applicable, repeat for any other output cards Cover Three Input and output buttons Front Panel Features Control buttons Control selection buttons These four buttonsEnter button The Enter button flashes green Operation and Setup, cont’d Powering Up Default display cycleLCD begins the default display cycle Green video only Front Panel OperationMaking input to output ties Video only green Press and release the Enter button figure An example of creating a set of video and audio ties Press the View button lights red Viewing ties Press and release the Esc button see -8. The View button Adding ties to existing ties Removing ties Press View and observe the LCD display see figurePress and release the Esc button see -12. The View button Another video input can now be tied to outputs 2 Press Esc to clear View and reset the LCD Press and release the Esc button see -16. The View button Replacing ties Input/Output grouping View V=7-22-3-- Ties A=2388-33 An example of creating a set of I/O groups 10001010 Muting an output Press Esc to clear all pending changes and reset the LCD=2388-33 VI EW V=7-22-3 Viewing and setting the RGB delay Viewing the RGB delayUnmuting an output Changing the RGB delay OUT #3 RGB Delay Input audio level gain and output audio volume Viewing input audio level and output audio volumeGain = See -26. The range is -18 dB to +24 dB Adjusting input audio level and output audio volume Presets Saving a presetOverview Recalling a preset Save Preset #11 Contrast Picture adjustmentsColor/Tint Brightness Adjusting the picture brightness/contrast Adjusting the picture color/tint Adjusting the picture detail Press the Esc button to clear all button and reset the LCDBRT OUT #5 Adjusting the picture position Adjusting the picture sizeCurrent size setting see -37 for that output =1024 Adjusting the picture zoom Front panel security lockout Executive modes Background illumination settings 40 Executive Mode 2 initiation and exit method Auto Image menu ISM 824 Menu System Input Conguration Input configuration menu Universal Scaler configuration menu Output card configuration menu ScalerUniversal Select Output submenu Input Setup submenuTo adjust the H pixel value, and rotate Right encoder to adjust the V line value Output Configuration Scaler boards Output Config submenu Press Next to return to the User Preset menu Press Next to return to the upper level Output Config. menuPress Menu to go to the next submenu User Presets User Presets submenu Aspect ratio Advanced Config submenuSplit Color Bars Split Grayscale ISM 824 Integration Default 49 Video Scaler output resolution/refresh rate table User Presets Within this submenu, up to 3 presets can be saved or erasedAdvanced Config Adjusted. Default setting is Input View Comm Settings menu Editing the communication settings System Reset Menu Exit menuScreen. Use this menu to exit from the device Reset Mode Comparison Summary Resetting the Unit with the Reset Button Four RS-232 Function RS-422 Front Panel Configuration PortRS-232/RS-422 Link Pin Ethernet connection SymbolsDefault address Ethernet Link ISM 824 specific symbol definitions SIS Programming and Control, cont’dX5 = Input and output video type Switcher-Initiated MessagesPower-up Input selection Reconfig Auto ImageAuto Memory Host-to-Switcher Instructions Switcher Error ResponsesUsing the Command/Response Tables OutX@ InX! RGB Command/Response Table for SIS CommandsProgramming Control, cont’d SprX4 @ $TypX!*X# RprX4 @Vmt0 @*1B@Vmt1 @*0B Vgp X4Out*X! X X5! X5! X5Mut X5! X5! X5 X! ...Vid Inf X\X\X\X\ \X\X\X\\ X\ X\ Multiswitcher SIS Programming and Control Front panel lockout executive modeX4*,X4 @*X% @%2AX% @VstX!*X% ZpgX4ZpxX5 @*X$ @%2AX$ @HstX!*X$ @AlnX!*X 12*X@*X* #@ApxX!*X 13*X@*X # @-Y @BrtX!*X1% @*X1% @%2AX1% @ConX!*X1%@*X1%Y @%2AX1% Y @BrtX!*X1% @+Y @BrtX!*X1% @*X2!*X2@ = @%2AX2!%2AX2@ = RteX@*X2!*X2@ @ZomX!*X5$*X1&*X1EscX@,X1*X1*X1&*X1&XY WX@,X1%2AX1%2AX1 X1*X1*X1&*X1 @*X2% @%2AX2% @RprX2% @*X2@RprX@*X2 @SprX@*X2 @ImgX Video Scaler ISM VS Output@*1M @*0M @VphX!*X1 @HszX!*X1@VszX!*X1 @*X2% @*X2!*X2@ =@*X\# @Pol X\ 16*X@*X1# @FlmX@ Frz1 @Blu1 Bottom blanking @*X1% @%2AX1% @BlbX!*X1%@ImgX! *1 @ImgX! *0 X7$ = Command/Response Table for IP SIS CommandsSymbol definitions X7 = IpzX7$ IpnX7IptX7@ X7# X8$ X8@EX8!,X8#,X8$,X8$, ... X8$EM X8#,X8$ Five Extron software CD window appears figure Installing the softwareInstallation from the CD-ROM ISM 824 Windows Control Program Download Center Web Installation from the Web site ISM 824 Multiswitcher Software, cont’d Using the softwareIf connecting by TCP/IP Extron ISM 824 Control Program main window -5 appears If connecting by RS-232 Tools Menu featuresControl program menus and pages File Data tracer window 10 ISM 824 I/O Group Settings menus − all groups cleared 11 ISM 824 I/O grouping completed 13 ISM 824 Unit Settings menus − IP and RS-232 windows 15 Firmware Loader window with selected firmware file Window Extron Firmware Loader appears ISM 824 Windows Control program Help Select the Video/audio mode Follow all or Breakaway Creating a tieRemoving a tie 20 Output video and audio signal muting Muting or unmuting output signals Settings 22 Recalling a preset Creating or editing input and output names Configuring the input video signal type Audio Settings Setting the RBG delay Adjusting the input gain and attenuation Adjusting the output volume levelPress Enter. The output’s volume is set to that level Create an input to output tie Output Cards Making picture adjustments Selecting an aspect ratioSelecting a test pattern Deselecting or re-selecting auto memory Saving or recalling user presetsSaving input presets Recalling an input preset Freezing an image Starting auto image Making input to output ties Setting top and bottom blanking values Recalling an input preset Button Label Generator Using the Button Label Generator software 34 Remove the button cap to replace the label Replacing the button labels ISM 824 Multiswitcher Software, cont’d Html Operation Start the Web browser program To access the ISM 824 using Html pages do the followingISM 824 Integration Scaling Multiswitcher Html Operation Downloading the Startup System Status System Status Unit Name field Configuration PagesSystem Settings page IP Settings fields Html Operation, cont’d Subnet Mask field Dhcp radio buttonsIP Address field Gateway IP Address field System Settings page Date/Time Settings fields ISM SettingsClick the desired value RGB delay Input configuration Passwords Executive modeEmail Alerts Eml extension that contains the message Setting up e-mail alertsSetting up Smtp authorization Click Edit. The Edit button changes to Save Both a user name and a password must be specified Firmware Upgrade Port Access the ISM 824 using Html pages as described onClick the Configuration tab Click the Firmware Upgrade link see figure Enter the new directory name in the Dir/ field File Management User Control Control Pages 12 Click in an output field to see the drop down list 13 A/V mute buttons status according to signal type 14 I/O Presets For the Universal Scaler is shown below Slot output card configurationEach configurable card has its own Universal Scaler ISM RGB User and input presets can be saved and/or recalled For the Video Scaler is shown below Video Scaler ISM VS Space spaces are accepted in names + ~ , @ = ‘ ’ semicolon Special Characters AAppendix a Ping to determine Extron IP address Ethernet Connection Ping to determine Web IP address Connect as a Telnet client Escape character and Esc key Ethernet Connection, cont’dTelnet tips Open Quit Local echoSet carriage return-line feed Close IP addresses and octets Subnetting a PrimerGateways Local and remote devices Determining whether devices are on the same subnet Unmasked octets are compared indicated by ? in figure A-6Masked octets are not compared indicated by X in figure A-6 Ethernet Connection, cont’d AppendixBB ReferenceInformation,co t’d Specifications Scaled RGBHV, RGBS, RGsB, HD digital component video YUV Vp-p for Y of component videoTo 1.0 Vp-p 50 Hz, 60 Hz, 72 Hz, 96 Hz, 100 Hz, or 120 Hz Reference Information, cont’d Dhcp = off Extron’s control/configuration program for WindowsARP, Icmp ping, TCP/IP, Telnet, Http Gateway = Included parts Part Numbers and AccessoriesAccessories ISM 824 part number Japan Asia Japan Extron Electronics. All rights reserved