Extron electronic ISM 824 manual Special Characters

HTML Operation, cont’d

To save and recall presets do the following:

1. Select either the User presets or Input presets drop down arrows as desired (see figure 6-18).

NThere are 3 user presets and 128 input presets. Each preset can be individually configured for the range of adjustments available for that output card.

2.	Click Save to save current configuration to that preset number, or click Recall
	to recall that preset as the current configuration.

To change the output configuration (resolution, refresh rate, sync format, and polarity) do the following:

1. Within the Output Configuration section, select the setting to be changed, and click on the drop down arrow. A drop down list appears. Scroll down the list the desired value and click. The page refreshes and the new value is shown.

The device is updated to the new setting.

To change the advanced configuration settings do the following:

NThe advanced settings for the Video Scaler card are top and bottom blanking, blue mode, 2:2 pull down, edge smoothing filter, auto memory, auto image, and enhancement mode.

1.	For top and bottom blanking adjustment, click the left (<) or right (>) arrows
	to decrease or increase the blanking area.

NAlternatively, if the new setting value is known, enter it directly into the field, and press enter.

2. Within the Advanced Setting section, click the check boxes of the settings to be turned on or off as desired. The device is updated to the new setting.

Special Characters

The HTML language reserves certain characters for specific functions. The switcher does not accept these characters as part of preset names, the switcher’s name, passwords, or locally created file names.

The switcher rejects the following characters:

{space (spaces are accepted in names)} + ~ , @ = ‘ [ ] { } < > ’ “ ; (semicolon)

: (colon) \ and ?.

6-20 ISM 824 Integration Scaling Multiswitcher • HTML Operation