Extron electronic ISM 824

ISM 824 Menu System

The ISM 824 has a six level menu system. Access

to each level and sub level is made

by using the menu control buttons.

• Menu button — The Menu

button enters and moves through the main

menu system in the ISM.

• Next button — The Next button steps

through the submenus in the ISM menu

system or exits the menu system.

Each level has separate submenus, accessed by

pressing the Next button. Within any submenu,

pressing the Menu button takes the user back up

a sub level.

See chapter 3, “Operation and Setup”, “ISM 824

Menu System” section, for complete step-by-step

information on conﬁguring the ISM with the

Menu System.

MENU NEXT

0 After 30 seconds of front panel inactivity, while in any menu or submenu,

the ISM unit times out and reverts to the default display cycle.

30 sec.

Input

Configuration Output Card

Configuration

Auto

Image

Menu Menu

30 sec. 30 sec. 30 sec.

System Reset

Menu Menu

30 sec. 30 sec.

Press NEXT

to Exit

View Comm

Settings

Submenu

Default

Cycle

Submenu

Front panel security lockout (Executive

mode)

The front panel security lockout limits some or

all the operation of the ISM from the front panel.

There are two levels of security available via the

front panel; Executive modes 1 and 2.

• Executive Mode 1— View Mode. Complete

front panel lockout except for viewing ties

and unlocking View mode. No changes

can be made and attempts result in the I/O

buttons blinking twice.

• Executive Mode 2 — I/O ties only. Partial

front panel lockout, allowing ties to

be changed, I/O presets recall, button

background illumination control, audio

gain/attenuation control, and unlocking

Executive 2 mode. Attempting other changes

result in the I/O buttons and the Enter

button blinking twice.

To initiate or exit Executive Mode 1 or 2 follow

the steps shown below:

To initiate or exit:

Press and hold the Video and Audio

buttons (2 seconds), until buttons

blink twice. Release.

Executive Mode

Off

I / O

VIDEO AUDIO

Executive Mode

View mode

Default

Cycle

Default

Cycle

Executive Mode 1

On initiating,

the LCD displays

On exiting,

the LCD displays

I / O

VIDEO AUDIO

To initiate or exit:

Press and hold Enter, Video, and Audio

buttons (2 seconds), until buttons blink twice.

Executive Mode

I/O Ties Only

Executive Mode

Off

Default

Cycle

C O N T R O L

PRESET

ESC

VIEW

ENTER

Executive Mode 2

On initiating,

the LCD displays

On exiting,

the LCD displays

Default

Cycle

See chapter 3, “Operation and Setup”, “Front

panel security lockout (Executive mode)” section,

for further information.

ISM 824 Integration Scaling Multiswitcher • Quick Start

QS-4

Quick Start —

ISM 824 Integration Scaling Multiswitcher, continued