Extron electronic ISM 824 manual Control Pages, User Control

Control Pages

To access the Control pages, click the Control tab from any other page. These pages allow configuration and viewing of input to output ties, setting and viewing output volume levels and muting status, auto image and image freeze selection, saving and recalling I/O preset, and specific configuration of individual output cards and image adjustment. The Control pages initially open on the User Control page.

User Control page

Limited device configurations can be made from the User Control page (figure 6-11).

Figure 6-11 — Control pages — User Control page

The User Control page emulates some of the ISM 824 front panel features and displays the current input selections, output volume, A/V mute status, image freeze and auto image settings. See chapter 3, “Operation and Setup,” for descriptions of the settings on this page.

To set or replace ties, do the following:

1.	In the signal type field, click Video only, Audio only, or Video & Audio
	depending on the signal type to be tied.

NWhen viewing the ties on the User Control page, video ties are shown green, audio ties are red, and video and audio ties amber (see figure 6-11).

2. Click the desired input/output button in the Set & View Ties map. The button changes color according to signal type and indicates a provisional tie with a letter “P” (see figure 6-11, input #1, output #5, for example).

NAn existing tie is replaced in favor of the new tie.

Click Cancel to abandon changes and revert back to the existing ties.

ISM 824 Integration Scaling Multiswitcher • HTML Operation 6-13