Extron electronic ISM 824 manual Front Panel Features, Input and output buttons

Operation and Setup

Front Panel Features

All of the ISM 824’s controls and indicators are on the front panel (figure 3-1). Input and output selection buttons are located on the left, with control and adjustment buttons, encoders, and an LCD screen towards the right. A 2.5 mm configuration port is located to the left of the picture adjustment buttons.

All buttons are backlit (green, red, or amber) and can be relabeled as desired. See Chapter 5, “Replacing the button labels” section.

1 3 4 6

INPUTS

CONTROL

I/OIO

ISM 824

CONTROL

1

2

3

4

5

6

7

8

ENTER

PRESET

VIEW

ESC

VIDEO

AUDIO

VERSION 1.00

ADJUST

1

2

3

4

5

6

7

8

CONFIG

TINT

CONT

COLOR/

BRIGHT/

DETAIL

POSITION

SIZE

ZOOM

MENU

NEXT

OUTPUTS

PICTURE ADJUSTMENTS

				ISM 824
				INTEGRATION SCALING MULTISWITCHER
2	9	5	7	8

Figure 3-1 — ISM 824 Integration Scaling Multiswitcher front panel features

Input and output buttons

A	Input selection buttons — The Input 1 through Input 8 buttons select and
	identify the associated input to tie to any selected output(s)

When an input button is lit green, it indicates a video input selection. When it is lit red it indicates an audio input selection, and when lit amber the input selection is both video and audio. Inputs can be tied to any output, as video, audio, or both. See the “ Front Panel Operation”, “Making input to output ties” section later in this chapter for the method.

Input buttons are also used to save and recall presets (1 to 8). See the ”Front Panel Operation”, “Saving a preset” and “Recalling a preset” sections later in this chapter for the method.

B	Output selection buttons — The output buttons 1 through 8 select the
	output to tie any selected active input, and for identifying any existing ties
	(video, audio, or both) active on that selected output. See the “Front Panel
	Operation”, “Viewing ties” section later in this chapter for the method.

When an output button is lit green, it indicates a video output is selected. If the button is lit red it indicates an audio output selection. If the button is lit amber, then both video and audio outputs are indicated. Outputs can be tied to any input, as video, audio, or both. See the “ Front Panel Operation”, “Making input to output ties” section later in this chapter for method.

Output buttons are also used to save and recall presets (9 to 16). See the ”Front Panel Operation”, “Saving a preset” and “Recalling a preset” sections later in this chapter for method.

NThroughout this manual the front panel buttons status (unlit, lit, or flashing) is

shown as:

Unlit Lit Flashing

3-2 ISM 824 Integration Scaling Multiswitcher • Operation and Setup