Extron electronic ISM 824 manual An example of creating a set of video and audio ties

The following example illustrates the principles of making new video/audio ties.

An example of creating a set of video and audio ties

In the following example, input 3 is tied to outputs 2, 6, and 7 as video and audio.

NThis example assumes that there are no existing ties for this input. 1. Press and release the Esc button (see figure 3-3).

Step 2.

Press the Esc button to clear all selections.

	C O N T R O L
ENTER	PRESET	VIEW	ESC

Step 3.

Press the Video button, the Audio button or both to toggle on and off.

I / O

VIDEO AUDIO

The Esc button	The Video button is lit green, and
flashes green once.	the Audio button is lit red when selected.

Figure 3-3 — Clear all pending selections, then select I/O

2.	If not already lit, select (press) the Video and Audio buttons for the tie. (see
	figure 3-3).
3.	Press and release the Input 3 button (figure 3-4).

Step 3.

Press and release the Input 3 button.

INPUTS

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

OUTPUTS

Step 4.

Press and release Outputs 2, 6, and 7 buttons.

The output buttons blink amber to indicate that video and/or audio inputs can be tied to these outputs.

The input button lights amber to indicate that video and/or audio

outputs can be tied to this input.

Step 5.

Press Enter button.

ENTER PRESET VIEW ESC

The Enter button blinks green to indicate the need to confirm the change.

After pressing Enter button all lights extinguish.

Figure 3-4 — Select the input, then the outputs, then press Enter

4. Press and release outputs 2, 6, and 7 buttons (figure 3-4). The three output buttons flash amber.

5. Press and release the Enter button (figure 3-4).

ISM 824 Integration Scaling Multiswitcher • Operation and Setup 3-7