Input configuration menu | Extron electronic ISM 824 specification

Operation and Setup, cont’d

Default

	Cycle
	Menu	30 sec.	Next
	Auto		Menu
	Auto	Next
	Image	Next	Next
	Image		Next
	Menu

Input

Conguration

Menu

Other Menus

30 sec.		30 sec.

Auto Image		Auto Image
<N/A>		Output #5

Next

Rotate either encoder to scroll through outputs #3 through #8, or press the desired button.

NOTE The output buttons for cards

that have auto image availability flash green.

30 sec.

Auto Image

Output #5

Next

Figure 3-42 — Auto image menu

2.	Press the Next button to enter the sub level.
3.	Rotate either encoder to select the desired output, or press the desired output
	button.

NWhen an output is selected that output button remains steady green, and other available output buttons continue to flash green.

4.	Press Next to exit the sub level. Auto image is applied to that selected output.
5.	Press the Menu button or wait for 30 seconds to return to default cycle

Input configuration menu

This is the second menu level, and is reached by pressing the Menu button twice, or pressing the button a number of times until the Input Configuration menu is shown on the LCD screen.

This menu allows the user to define the signal format for any individual input. The signal formats available are RGB (the default), YUV-HD, YUVp, YUVi, S-video, and composite. The input signal may be processed or passed unprocessed depending on the output selected for that input.

To configure and input signal format, do the following:

1.	From the default cycle, press the Menu button twice to select the input
	configuration menu (see figure 3-43)
2.	Press the Next button to enter the sub level.

Default

Cycle

NOTE When the sub menu is selected, all input buttons flash green. Select an input by pressing its button. The button lights steady green, and the LCD indicates the selected input. Other non selected inputs continue to flash green.

Menu

30 sec.

Auto

Image

Menu

Input Next

Configuration

Menu

Output Card

Configuration

Menu

Other

Menu levels

Next

Menu

	30 sec.
Input	#4

S-video		Inputs #1 through #8

Rotate either encoder to select a signal format - RGB, YUV-HD, YUVp, YUVi, S-Video, Composite

Figure 3-43 — Input configuration menu

3-30 ISM 824 Integration Scaling Multiswitcher • Operation and Setup

Image 62

Extron electronic ISM 824 manual Input configuration menu, Input Conguration

Contents

Integration Scaling Multiswitcher ISM Sicherheitsanleitungen Deutsch Safety Instructions EnglishConsignes de Sécurité Français Instrucciones de seguridad Español ISM 824 Integration Scaling Multiswitcher FCC Class a Notice Ii ISM 824 Integration Scaling Multiswitcher ISM 824 Integration Scaling Multiswitcher Quick Start QS-1 Pass-through outputs Connect video Making input to output ties Quick Start ISM 824 Integration Scaling MultiswitcherQS-2 ISM 824 Integration Scaling Multiswitcher Quick Start ISM 824 Integration Scaling Multiswitcher Quick Start QS-3 Picture adjustmentsPresets OUT #5 ISM 824 Menu System Front panel security lockout Executive modeQS-4 ISM 824 Integration Scaling Multiswitcher Quick Start Menu button The Menu Table of Contents Table of Contents, cont’d Page Table of Contents, cont’d Sys tems s ettings page IP Settings fields Rev. a One About this Manual About the Integration Scaling MultiswitcherISM 824 Integration Scaling Multiswitcher Introduction Typical ISM 824 application Introduction, cont’d Definitions Outputs FeaturesInputs Tie any input to any or all outputs Optional Output Card Features Universal Scaler card ISM RGB Single Output Wideband card ISM 1WB Video Scaler card ISM VSDual Output Wideband card ISM 2WB Introduction, cont’d Two Important safety instructions Installationstallation, cont’dUL/Safety Requirements ISM 824 Integration Scaling Multiswitcher Installation UL requirements for rack mounted devices Mounting the SwitcherTabletop placement Rack mounting Power and control connections Installation, cont’dRear Panel Features and Connection Terminating the network cable Cabling and RJ-45 connector wiringChoosing a network cable Input connections Input connections for various video formats Output connections Balanced Stereo Output Audio output connections Optional output card connectionsVideo output connections If applicable, repeat for any other output cards Installing the optional output cardsPlace Cover Three Front Panel Features Input and output buttons Enter button The Enter button flashes green Control buttonsControl selection buttons These four buttons Operation and Setup, cont’d LCD begins the default display cycle Powering UpDefault display cycle Video only green Front Panel OperationMaking input to output ties Green video only An example of creating a set of video and audio ties Press and release the Enter button figure Viewing ties Press the View button lights red Adding ties to existing ties Press and release the Esc button see -8. The View button Press and release the Esc button see -12. The View button Removing tiesPress View and observe the LCD display see figure Press Esc to clear View and reset the LCD Another video input can now be tied to outputs 2 Replacing ties Press and release the Esc button see -16. The View button View V=7-22-3-- Ties A=2388-33 Input/Output grouping 10001010 An example of creating a set of I/O groups VI EW V=7-22-3 Press Esc to clear all pending changes and reset the LCD=2388-33 Muting an output Unmuting an output Viewing and setting the RGB delayViewing the RGB delay OUT #3 RGB Delay Changing the RGB delay Gain = Input audio level gain and output audio volumeViewing input audio level and output audio volume Adjusting input audio level and output audio volume See -26. The range is -18 dB to +24 dB Overview PresetsSaving a preset Save Preset #11 Recalling a preset Brightness Picture adjustmentsColor/Tint Contrast Adjusting the picture color/tint Adjusting the picture brightness/contrast BRT OUT #5 Adjusting the picture detailPress the Esc button to clear all button and reset the LCD Current size setting see -37 for that output Adjusting the picture positionAdjusting the picture size Adjusting the picture zoom =1024 Background illumination settings Front panel security lockout Executive modes 40 Executive Mode 2 initiation and exit method ISM 824 Menu System Auto Image menu Input configuration menu Input Conguration Output card configuration menu Universal Scaler configuration menu ScalerUniversal Right encoder to adjust the V line value Input Setup submenuTo adjust the H pixel value, and rotate Select Output submenu Output Config submenu Output Configuration Scaler boards User Presets submenu Press Next to return to the upper level Output Config. menuPress Menu to go to the next submenu User Presets Press Next to return to the User Preset menu Split Grayscale Advanced Config submenuSplit Color Bars Aspect ratio Default ISM 824 Integration 49 Video Scaler output resolution/refresh rate table Advanced Config User PresetsWithin this submenu, up to 3 presets can be saved or erased Adjusted. Default setting is View Comm Settings menu Input Editing the communication settings Screen. Use this menu to exit from the device System Reset MenuExit menu Resetting the Unit with the Reset Button Reset Mode Comparison Summary Four Pin Front Panel Configuration PortRS-232/RS-422 Link RS-232 Function RS-422 Ethernet Link SymbolsDefault address Ethernet connection X5 = ISM 824 specific symbol definitionsSIS Programming and Control, cont’d Input selection Switcher-Initiated MessagesPower-up Input and output video type Auto Memory ReconfigAuto Image Using the Command/Response Tables Host-to-Switcher InstructionsSwitcher Error Responses Control, cont’d Command/Response Table for SIS CommandsProgramming OutX@ InX! RGB RprX4 @ $TypX!*X# SprX4 @*0B @*1B@Vmt1 @Vmt0 X! ...Vid X5! X5! X5Mut X5! X5! X5 Vgp X4Out*X! X \ X\ X\ Inf X\X\X\X\\X\X\X\ X4*,X4 Multiswitcher SISProgramming and Control Front panel lockout executive mode @*X$ @%2AX$ @HstX!*X$ ZpgX4ZpxX5 @*X% @%2AX% @VstX!*X% 13*X@*X # 12*X@*X* #@ApxX!*X @AlnX!*X @+Y @BrtX!*X1% @*X1% @%2AX1% @ConX!*X1%@*X1%Y @%2AX1% Y @BrtX!*X1% @-Y @BrtX!*X1% X1*X1*X1&*X1 @ZomX!*X5$*X1&*X1EscX@,X1*X1*X1&*X1&XY WX@,X1%2AX1%2AX1 @*X2!*X2@ = @%2AX2!%2AX2@ = RteX@*X2!*X2@ @SprX@*X2 @*X2@RprX@*X2 @*X2% @%2AX2% @RprX2% @*0M Video Scaler ISM VS Output@*1M @ImgX @VszX!*X1 @VphX!*X1@HszX!*X1 @Pol X\ @*X2!*X2@ =@*X\# @*X2% @Blu1 @FlmX@ Frz1 16*X@*X1# @ImgX! *0 @*X1% @%2AX1% @BlbX!*X1%@ImgX! *1 Bottom blanking X7 = Command/Response Table for IP SIS CommandsSymbol definitions X7$ = X7# IpnX7IptX7@ IpzX7$ X8#,X8$ X8@EX8!,X8#,X8$,X8$, ... X8$EM X8$ Five ISM 824 Windows Control Program Installing the softwareInstallation from the CD-ROM Extron software CD window appears figure Installation from the Web site Download Center Web If connecting by TCP/IP ISM 824 Multiswitcher Software, cont’dUsing the software If connecting by RS-232 Extron ISM 824 Control Program main window -5 appears File Menu featuresControl program menus and pages Tools Data tracer window 10 ISM 824 I/O Group Settings menus − all groups cleared 11 ISM 824 I/O grouping completed 13 ISM 824 Unit Settings menus − IP and RS-232 windows Window Extron Firmware Loader appears 15 Firmware Loader window with selected firmware file Help ISM 824 Windows Control program Removing a tie Select the Video/audio mode Follow all or BreakawayCreating a tie Muting or unmuting output signals 20 Output video and audio signal muting 22 Recalling a preset Settings Configuring the input video signal type Creating or editing input and output names Setting the RBG delay Audio Settings Press Enter. The output’s volume is set to that level Adjusting the input gain and attenuationAdjusting the output volume level Output Cards Create an input to output tie Selecting a test pattern Making picture adjustmentsSelecting an aspect ratio Recalling an input preset Saving or recalling user presetsSaving input presets Deselecting or re-selecting auto memory Starting auto image Freezing an image Making input to output ties Setting top and bottom blanking values Recalling an input preset Using the Button Label Generator software Button Label Generator Replacing the button labels 34 Remove the button cap to replace the label ISM 824 Multiswitcher Software, cont’d Html Operation Downloading the Startup To access the ISM 824 using Html pages do the followingISM 824 Integration Scaling Multiswitcher Html Operation Start the Web browser program System Status System Status Html Operation, cont’d Configuration PagesSystem Settings page IP Settings fields Unit Name field Gateway IP Address field Dhcp radio buttonsIP Address field Subnet Mask field Click the desired value System Settings page Date/Time Settings fieldsISM Settings Input configuration RGB delay Email Alerts PasswordsExecutive mode Click Edit. The Edit button changes to Save Setting up e-mail alertsSetting up Smtp authorization Eml extension that contains the message Firmware Upgrade Both a user name and a password must be specified Click the Firmware Upgrade link see figure Access the ISM 824 using Html pages as described onClick the Configuration tab Port File Management Enter the new directory name in the Dir/ field Control Pages User Control 12 Click in an output field to see the drop down list 13 A/V mute buttons status according to signal type 14 I/O Presets Universal Scaler ISM RGB Slot output card configurationEach configurable card has its own For the Universal Scaler is shown below User and input presets can be saved and/or recalled Video Scaler ISM VS For the Video Scaler is shown below Special Characters Space spaces are accepted in names + ~ , @ = ‘ ’ semicolon AAppendix a Ethernet Connection Ping to determine Extron IP address Connect as a Telnet client Ping to determine Web IP address Open Ethernet Connection, cont’dTelnet tips Escape character and Esc key Close Local echoSet carriage return-line feed Quit Local and remote devices Subnetting a PrimerGateways IP addresses and octets Masked octets are not compared indicated by X in figure A-6 Determining whether devices are on the same subnetUnmasked octets are compared indicated by ? in figure A-6 Ethernet Connection, cont’d AppendixBB Specifications ReferenceInformation,co t’d 50 Hz, 60 Hz, 72 Hz, 96 Hz, 100 Hz, or 120 Hz Vp-p for Y of component videoTo 1.0 Vp-p Scaled RGBHV, RGBS, RGsB, HD digital component video YUV Reference Information, cont’d Gateway = Extron’s control/configuration program for WindowsARP, Icmp ping, TCP/IP, Telnet, Http Dhcp = off ISM 824 part number Part Numbers and AccessoriesAccessories Included parts Asia Japan Japan Extron Electronics. All rights reserved