Black Box ServSwitch manual Display Configuration Menu Ctrl F12, Display CPU List Ctrl Esc

MATRIX SERVSWITCH™

6.2 Display Configuration Menu: [Ctrl] [F12]

This command (press and release left [Ctrl], then press and release function key [F12]) causes the Matrix ServSwitch to display its main configuration menu on screen. For more information about this menu and all of the configuration functions accessible through it, see Chapter 4.

6.3 Display CPU List: [Ctrl] [Esc]

This command (press and release left [Ctrl], then press and release the escape key [Esc]) causes the Matrix ServSwitch to display, as shown below, a list of all CPU ports attached to the system—at least all of the ones whose CPU numbers are less than the system’s current “Maximum computer” setting (see Section 4.2.1). (In order to fill the display, even CPU ports with numbers higher than the maximum computer will sometimes be displayed.) A diamond will appear next to the number of the computer you currently have selected. To select a different computer, highlight its name and press [Enter]. Press the [PageUp] and [PageDn] keys to scroll through the list. If you want to remove this list from the screen without selecting a computer, press [Esc].

If you select a computer from the list, and the selection goes through, you will see a “Connection successful” message (see Section 5.2.1), and you will have as much access to that computer as your user profile’s connection-mode setting allows (see Sections 4.6 and 5.4). If your selection fails, you will see a “Connection failed” message stating the reason why (see Section 5.2.2).

Computer select menu

1Mail Server

2NT Server 1

3NT Server 2 4♦NT Server 3

5Inventory

6Inventory 2

7Sales domain

8	Computer	8
9	Computer	9
10	Computer	10
11	Computer	11
12	Computer	12
13	Computer	13
14	Computer	14
15	Computer	15
16	Computer	16

Figure 6-1. The CPU list.

78