Tally Genicom 9025N manual Network Menu, Config TCP to Yes

Network Menu

This menu lets you set the network interface card’s configuration . (*: the default setting)

Item Explanation

Config Network

Values: Yes, No*

Set whether or not you want to configure network values.

If you select Yes, the following options are available : Config TCP, Config 802.11b, AppleTalk, Netware and Config Netware menu.

3

	Values: Yes, No*
	Select whether you want to set the IP
Config TCP	address item or not.

If you select Yes, the following options are available : IP Get Method, IP Address, Subnet Mask and Gateway menu.

	Values: Static*, BOOTP, DHCP
	You can set this item only when you set
	Config TCP to Yes.
IP Get Method	• Static:You can enter IP address,
	subnetmask, and gateway manually.
	• BOOTP:The BOOTP server allots the IP
	address to you automatically.
	• DHCP: The DHCP server allots the IP
	address to you automatically.
	You can select this item only when you
	set IP Get Method to Static. This item
	lets you enter the IP address manually.
IP Address	Press the scroll button to set the value of
	the 1st byte between 0 and 255, and
	then press the Enter button.
	For the 2nd to the 4th byte, you can set
	the value in the same way.

USING THE CONTROL PANEL 3.19