Tally Genicom 9025N manual PCL Menu

PCL Menu

This menu sets the PCL emulation configuration. You can set the font type, symbol type, lines per page, and point size.

(*: the default setting)

Item	Explanation
	Values: PCL1* ~ PCL54
	You can select the standard font to be used
	in PCL emulation.
	• PCL1~PCL7’s interval between letters is
Typeface	fixed, and PCL8~PCL45’s interval is
	proportional to the font type and point
	size. You can adjust the font size of
	PCL1~PCL7 using the Pitch item, and
	PCL8~PCL45 can do using Point Size
	item (see page 3.17).
	• PCL46~PCL54’s interval and point size are
	fixed.
	Values: ROMAN8 ~ PCCYRIL		*PC8
Symbol	This item selects the symbol to be used in
	PCL emulation. The symbol is the group of
	numbers, marks, and special signs being
	used when printing letters.
	Values: 5 ~ 128	*60 (Letter), 64 (A4)
Lines	This item allows you to set vertical spacing
	from 5 to 128 lines for the default paper
	size. The lines may differ according to the
	paper size and printing orientation.
	Values: 0.44 ~ 99.99 (0.01 unit)		*10
Pitch	When you select one between PCL1 and
	PCL7 from the Typeface menu, you can
	determine the font size by setting the
	number of characters that will print in one
	horizontal inch of type. The default value, 10
	is the best size.

3.16 USING THE CONTROL PANEL