Extron electronic ISM 824 manual Html Operation, cont’d, Configuration Pages, Unit Name field

HTML Operation, cont’d

Configuration Pages

Click on the Configuration tab, to download the ISM’s configuration pages. These pages gives access to the system settings, ISM settings, passwords, email settings, and to the Firmware Upgrade facility. All the pages within the Configuration series have fields which can be edited to allow changes to the system settings, the unit settings, administration settings, and to select firmware to upgrade the unit. Individual configuration pages can be accessed by clicking the appropriate link in the column on the left side of the page.

The initial screen displayed shows the System Settings page (see figure 6-3).

Figure 6-3 — Configuration — System Settings

System Settings page – IP Settings fields

The IP Settings fields provide a location for viewing and editing settings unique to the ISM/Ethernet interface. After editing any of the settings on this page, click Submit at the bottom of the section. The screen refreshes and the unit is updated.

NIf an error is made during field editing and before submitting, click Cancel. The screen refreshes with the previous entries. The unit is not updated.

Some fields are not changeable

Unit Name field

The Unit Name field contains the name used as the “from” information when the switcher e-mails alerts. This name field can be changed to any valid name, up to 24 alphanumeric characters.

NThe following characters are invalid in the name: + ~ , @ = ‘ [ ] { } < > ’ “ ; : \ and ?.

6-4 ISM 824 Integration Scaling Multiswitcher • HTML Operation