ISM 824 Multiswitcher Software, cont’d

Adjusting the input gain and attenuation

To adjust the input gain and attenuation, do the following:

1. Click the input which is to be adjusted. The value field will open and show two scrolling arrows.

2. Either; using the arrows, scroll up or down to the desired setting (in 1 dB increments), or directly type in the value (see figure 5-28). Press Enter. The input’s gain and attenuation is set to that level.

Figure 5-28 — Enter a value, or scroll the arrows to set the input levels

NIf a value beyond the minimum or maximum level (-18 dB or +24 dB) is entered, the entry defaults to -18 dB or 24 dB or respectively.

3.

To set all inputs to the same value, enter the value in input 1 and click Set all

 

to Input 1 level. All fields are changed to match input 1’s entry.

Adjusting the output volume level

To adjust the output volume level, do the following:

1.

Click the output that is to be adjusted. The value field opens and shows two

 

scrolling arrows.

2.

Either; using the arrows, scroll up or down to the desired setting (from 0 to 64,

 

where value 0 = -64 db, 64 = 0 dB), or directly type in the value (see figure 5-29).

 

Press Enter. The output’s volume is set to that level.

 

 

 

 

 

 

Figure 5-29 — Enter a value or scroll arrows to set the output volume

NIf a value beyond the maximum or minimum level (0 or 64) is entered, the entry defaults to 0 or 64 respectively.

3.

To set all output volumes to the same value, enter the value in input 1 and

 

click Set all to output 1 level. All fields are changed to match output 1’s entry.

5-18 ISM 824 Integration Scaling Multiswitcher • ISM 824 Multiswitcher Software

Page 120
Image 120
Extron electronic ISM 824 manual Adjusting the input gain and attenuation, Adjusting the output volume level