Ethernet Configuration Commands

Example

The following example enables auto-negotiation on Ethernet port 1.

Console(config)# interface ethernet ext.1

Console(config-if)# negotiation

flowcontrol

The flowcontrol Interface Configuration (Ethernet, port-channel) mode command configures flow control on a given interface. To disable flow control, use the no form of this command.

Syntax

flowcontrol {auto on off}

no flowcontrol

Parameters

auto — Indicates auto-negotiation

on — Enables flow control.

off — Disables flow control.

Default Configuration

Flow control is off.

Command Mode

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

Negotiation should be enabled for flow control auto.

Example

In the following example, flow control is enabled on port 1.

Console(config)# interface ethernet ext.1

Console(config-if)# flowcontrol on

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide

85

Page 101
Image 101
Intel SBCEGBESW10 CLI manual Flowcontrol auto on off No flowcontrol