Intel SBCEGBESW10 CLI manual Ip domain-name name No ip domain-name

IP Address Commands

Default Configuration

IP Domain Naming System (DNS)-based host name-to-address translation is enabled.

Command Mode

Global Configuration mode

User Guidelines

There are no user guidelines for this command.

Example

The following example enables IP Domain Naming System (DNS)-based host name-to- address translation.

Console(config)# ip domain-lookup

ip domain-name

The ip domain-nameGlobal Configuration mode command defines a default domain name used by the software to complete unqualified host names (names without a dotted- decimal domain name). To remove the default domain name, use the no form of this command.

Syntax

ip domain-name name

no ip domain-name

Parameters

•name — Specifies the default domain name used to complete unqualified host names. Do not include the initial period that separates an unqualified name from the domain name. (Range: 1-158 characters)

Default Configuration

A default domain name is not defined.

Command Mode

Global Configuration mode

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 129