Intel SBCEGBESW10 CLI manual Set, No set

QoS Commands

User Guidelines

Action serviced to a class, so that if an IP packet arrives, the queue is assigned per DSCP. If a non-IP packet arrives, the queue is assigned per CoS (VPT).

Example

The following example configures the trust state for a class called class1 in a policy map called policy1.

Console (config)# policy-mappolicy1

Console (config-pmap)# class class1

Console (config-pmap-c)# trust cos-dscp

set

The set Policy-map Class Configuration mode command sets new values in the IP packet.

Syntax

set {dscp new-dscp queue queue-id cos new-cos}

no set

Parameters

•new-dscp— Specifies a new DSCP value for the classified traffic. (Range: 0-63)

•queue-id— Specifies an explicit queue ID for setting the egress queue.

•new-cos— Specifies a new user priority for marking the packet. (Range: 0-7)

Default Configuration

This command has no default configuration.

Command Mode

Policy-map Class Configuration mode

User Guidelines

This command is mutually exclusive with the trust Policy-map Class Configuration command within the same policy map.

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 177