Specifications, Amplifier Section, Video Section, General

Specifications

Rated Output Power (FTC)

All channels:	90 watts minimum continuous power
	per channel, 8 ohm loads, 2 channels
	driven from 20 Hz to 20 kHz, with a
	maximum total harmonic distortion of
	0.08%
	105/110 watts minimum continuous
	power per channel, 8 ohm loads,
	2 channels driven at 1 kHz, with a
	maximum total harmonic distortion of
	0.7/0.9%
	110 watts minimum continuous power
	per channel, 6 ohm loads, 2 channels
	driven at 1 kHz with a maximum total
	harmonic distortion of 0.1%
Maximum Output Power (JEITA)
	7 ch υ 175 W at 6 ohms, 1 kHz, 1 ch
	driven
Dynamic Power	210 W + 210 W (3 :, Front)
	180 W + 180 W (4 :, Front)
	110 W + 110 W (8 :, Front)
THD (Total Harmonic Distortion)
	0.08% (Power Rated)
	0.08% (1 kHz, 1 W)
Damping Factor	60 (Front, 1 kHz, 8 :)
Input Sensitivity and Impedance
	200 mV/47 k: (LINE)
Output Level and Impedance
	200 mV/470 : (REC OUT)
Frequency Response	5 Hz - 100 kHz/+1 dB - 3 dB (Direct mode)
Tone Control	±10 dB, 50 Hz (BASS)
	±10 dB, 20 kHz (TREBLE)
Signal to Noise Ratio	100 dB (LINE, IHF-A)
Speaker Impedance	North American: 6 : - 16 :
	Australian: 4 : - or 6 : - 16 :

Input Sensitivity/Output Level and Impedance

1Vp-p/75 :(Component and S-Video Y) 0.7 Vp-p/75 :(Component PB/CB, PR/CR) 0.28 Vp-p/75 :(S-Video C)

1Vp-p/75 :(Composite)

Component Video Frequency Response

5 Hz - 50 MHz - 3 dB

FM Tuning Frequency Range

■Control Terminals

Specifications and features are subject to change without notice.