Integra DTR-5.8 instruction manual OSD Setup, Then press Enter

Select if your TV is 4 : 3 (default).

Select if your TV is 16 : 9.

Advanced Setup—Continued

OSD Setup

1Press the [Receiver] button fol- lowed by the [Setup] button.

The main menu appears onscreen.

2	Use the Up and Down [ ]/[ ]
	buttons to select

“6. Miscellaneous,” and then press [Enter].

The Miscellaneous menu appears.

6.Miscellaneous

1.Volume Setup

2.OSD Setup

3.12V Trigger A Setup

4.12V Trigger B Setup

5. 12V Trigger C Setup

3	Use the Up and Down [ ]/[ ]
	buttons to select “2. OSD Setup,”
	and then press [Enter].
	The OSD Setup menu appears.
	6–2. OSD Setup
	Immediate Display	On
	Monitor Type	4 : 3
	Display Position	Bottom
	TV Format	Auto

4	Use the Up and Down [ ]/[	]
	buttons to select the settings,
	and use the Left and Right [	]/
	[ ] buttons to set them.

These settings determine how the oper- ation details are displayed.

Immediate Display

This preference determines whether operation details are displayed onscreen when an AV receiver function is adjusted.

On: Displayed (default).

Off: Not displayed.

Even when On is selected, operation details may not be output if the input source is connected to a COMPO- NENT VIDEO IN or HDMI IN.

Monitor Type

With this preference, you can specify the aspect ratio of your TV so that the operation details are displayed prop- erly.

4 : 3:

16 : 9:

Display Position

This preference determines where on the screen operation details are dis- played.

Bottom: Bottom of the screen (default).

Top: Top of the screen.

TV Format (not North American model)

See “TV Format Setup (not North

American model)” on page 52.

5When you’ve finished, press the [Setup] button.

The setup menu closes.

Note:

This procedure can also be performed on the AV receiver by using its [Setup] button, arrow buttons, and [Enter] button.

80