Integra DTR-5.8 instruction manual Controlling Other Components, Entering Remote Control Codes

Controlling Other Components

You can use the AV receiver’s remote controller (RC-683M) to control your other AV components, including those made by other manufacturers. This sec- tion explains how to enter the necessary remote control code for the component that you want to control (e.g., DVD player, TV, or VCR).

Receiver
Number	Remote
buttons
	Mode

2

3

While holding down the Remote Mode button that you want to set, press the [Display] button for 3 seconds.

The Remote Mode button lights up.

Within 30 seconds, use the num- ber buttons to enter the 4-digit remote control code.

The Remote Mode button flashes twice.

Display L Night

Entering Remote Control Codes

To control another component, you must first enter the appropriate remote control code to a Remote Mode but- ton. You’ll need to enter a code for each component that you want to control.

1Look up the appropriate remote control code in the separate Remote Control Codes list.

The codes are organized by category (e.g., DVD player, TV, etc.).

4Press the Remote Mode button again to select the remote con- troller mode, point the remote controller at the component, and check the operation.

If the remote controller doesn’t work as expected, and several remote codes are listed, try each one in turn and use the one that works best.

Notes:

•A remote control code cannot be entered for the [Receiver] Remote Mode button.

•The remote control codes provided are correct at the time of printing, but are subject to change.

90