Integra DTR-5.8 instruction manual Using the Remote Controller, Receiver/Tape Mode

Remote Controller—Continued

Using the Remote Controller

The remote controller can be used to control different components including the AV receiver. The remote con- troller has a specific operating mode for use with each type of component. Modes are selected by using the six Remote Mode buttons.

■Receiver/Tape Mode

In Receiver/Tape mode, you can control the AV receiver and an Integra cassette recorder

connected via .

■DVD and CD/MD/CDR/Dock Modes

With these modes, you can control a DVD player and CD Player, MD recorder, CDR, or RI dock. By entering the appropriate remote control code, you can control com- ponents made by other manufacturers (see page 90).

■TV, VCR and SAT/Cable Modes

With these modes, you can control a TV, VCR, and satellite or cable receiver. You must enter the appropriate remote control code first (see page 90).

1Press one of the Remote Mode buttons to select a mode.

2Use the buttons supported by that mode to control the compo- nent.

Receiver/Tape mode: see right column

DVD mode: see page 15

CD/MD/CDR/Dock mode: see page 16

TV, VCR, SAT/Cable modes: see page 92

Note:

Some of the remote controller operations described in this manual may not work as expected with other com- ponents.

Receiver/Tape Mode

Receiver/Tape mode is used to control the AV receiver. It can also be used to control an Integra cassette recorder

connected via .

1

2

3

4bl

1

5bm

	bn
2
	bo
36
7	bp
4
8
9
bk	bq
	br

Buttons , , , and  are used when the Tuner or Tape input is selected.

13