Integra DTR-5.8 First Time Setup, 2, 3-8, Automatic Speaker Setup Audyssey 2EQ, Notes

First Time Setup

This section explains the settings that you need to make before using the AV receiver for the very first time.

Automatic Speaker Setup (Audyssey 2EQ)

With the supplied speaker setup microphone, the Audyssey 2EQ function can measure the number of speakers connected, their sizes, crossover frequencies, and the distance from each speaker to the listening posi- tion and calculate the optimal speaker settings for your listening environment automatically.

Before using this function, connect and position all of your speakers.

Using Audyssey 2EQ

1

Measurement Points

To create a listening area in which several people can enjoy home theater simultaneously, the Audyssey 2EQ function takes measurements at three points within the listening area:

First measurement point

This is the center point of the listening area, or the listening position if it’s just one person.

Second measurement point

The right side of the listening area.

Third measurement point

The left side of the listening area.

The distances between points  and  and points  and  must be at least 1 meter.

From the examples below, choose the listening area that best matches yours and place the microphone accord- ingly when prompted.

TV TV TV

TV TV TV

TV TV TV

:listening area : listening position

2, 9

3-8

Note: If any of your speakers is 4 ohms, change the minimum speaker impedance setting before running the automatic speaker setup (see page 51).

Notes:

•If the AV receiver was previously muted, it will be unmuted.

•Automatic speaker setup cannot be performed while a pair of headphones is connected.

•It takes about 10 minutes to complete the auto- matic speaker setup.

1 Turn on the AV receiver and the connected TV.

On the TV, select the input to which the AV receiver is connected.

41