Integra DTR-5.8 Review SP Config, Review SP Distance, Review SP Level, First Time Setup—Continued

First Time Setup—Continued

6

7

The following screen appears.

Auto Speaker Setup AUDYSSEY

Please place microphone at left end

of listening area at ear height.

Push Enter : Next

Move the speaker setup micro- phone to measurement point 

(page 41), then press [Enter].

Audyssey 2EQ performs more mea- surements. This takes a few minutes.

When the measurements are complete, the following screen appears.

Auto Speaker Setup AUDYSSEY

Calculating...

8When the calculations are com- plete, the following screen appears.

Auto Speaker Setup AUDYSSEY

1.Save

2.Review SP Config

3.Review SP Distance

4.Review SP Level

5.Cancel

Use the Up and Down []/[ ] buttons to select an option, and then press [Enter].

The options are: Save:

Save the calculated settings and exit the automatic speaker setup.

Review SP Config:

Review the speaker configuration settings (see “Reviewing the Results” on page 45

Review SP Distance:

Review the speaker distance set- tings (see “Reviewing the Results” on page 45).

Review SP Level:

Review the speaker level settings (see “Reviewing the Results” on page 45).

Cancel:

Cancel the automatic speaker setup.

9Disconnect the speaker setup microphone.

Auto Speaker Setup AUDYSSEY

Please unplug microphone.

Notes:

•When the automatic speaker setup is complete, the Equalizer Settings (page 72) will be set to “Audyssey.”

•You can cancel the automatic speaker setup at any point in this procedure simply by disconnecting the setup microphone.

43