Integra DTR-5.8 2 3 4, Correcting Sound and Picture Sync, Advanced Setup—Continued

Advanced Setup—Continued
Correcting Sound and Picture Sync
		5	Press [Enter], and use the Left
When using progressive scanning on your DVD player,			and Right [ ]/[ ] buttons to
you may find that the picture and sound are out of sync.			adjust the delay from 0 to 100 mil-
With this setting, you can correct this by delaying the			liseconds in 2 millisecond steps.
audio signals. You can set it from 0 to 100 milliseconds			To view the TV picture while setting
(msec) in 2 millisecond steps.			the delay, press [Enter].
1	Press the [Receiver] button fol-

lowed by the [Setup] button.

The main menu appears onscreen.

2

3

4

Use the Up and Down []/[ ] buttons to select “4. Source Setup,” and then press [Enter].

The Source Setup menu appears.

4. Source Setup

DVD

1.IntelliVolume

2.A/V Sync

Use the Input Selector buttons on the remote controller to select the input source that you want to correct.

This can be the [DVD], [VCR/DVR], [CBL/SAT], [Game/TV], [AUX], [Tape], [Tuner], or [CD] input source.

Use the Up and Down []/[ ] buttons to select “2. A/V Sync,” and then press [Enter].

The A/V Sync menu appears.

4–2. A/V Sync

	DVD
A/V Sync		20msec
(HDMI Lip Sync		0msec)

Press Enter to see picture.

If HDMI Lip Sync is enabled (see page 82), and your TV or display sup- ports HDMI Lip Sync, the HDMI Lip Sync delay time is displayed under- neath in parentheses.

Note:

•This setting is not available when the Direct listening mode is used with an analog input signal.

•This procedure can also be performed on the remote controller by using Input Selector buttons and [Enter] button.

Press and hold, for more than 5 seconds, the input

selector button for the input source that you want to correct. Use the Left and Right []/[ ] buttons to adjust the delay.

78