Integra DTR-5.8 instruction manual 2, 2-7, Equalizer Setting, The Speaker Setup menu appears

Advanced Setup—Continued

Equalizer Setting

3

This setting is set automatically by the Automatic Speaker Setup function (see page 41).

Here you can adjust the EQ of individual speakers. To set the volume of individual speakers see page 71.

1

4

2, 3

2-7

1, 8

1Press the [Receiver] button fol- lowed by the [Setup] button.

The main menu appears onscreen. 5

2	Use the Up and Down [ ]/[		]
	buttons to select “2. Speaker
	Setup,” and then press [Enter].
	The Speaker Setup menu appears.
	2.	Speaker Setup
	1.	Speaker Settings	6
	2.	Speaker Config
	3.	Speaker Distance
	4.	Level Calibration
	5.	Equalizer Settings

Use the Up and Down []/[ ] buttons to select “5. Equalizer Settings,” and then press [Enter].

The Equalizer Settings menu appears.

2–5. Equalizer Settings

EqualizerOff

Use the Left and Right []/[ ] buttons to select:

Off: Tone off, response flat. Audyssey: The tone for each speaker

is set automatically by the Automatic Speaker Setup function.

Be sure to select this set- ting after having per- formed the Automatic Speaker Setup.

Manual: You can adjust the EQ of each speaker manually.

If you select Manual, continue with this procedure. If you select Off or Audys- sey, go to step 8.

Use the Down [ ] button to select “Channel,” and then use

the Left and Right [		]/[ ] but-
tons to select a speaker.
	2–5. Equalizer Settings
	Equalizer	Manual
	Channel	Front
	80Hz	0dB
	250Hz	0dB
	800Hz	0dB
	2500Hz	0dB
	8000Hz	0dB

Use the Up and Down []/[ ] buttons to select a frequency, and then use the Left and Right []/[ ] buttons to adjust the level at that frequency.

The volume at each frequency can be adjusted from –6 to +6 dB in 1 dB steps.

Tip: Low frequencies (e.g., 80 Hz) affect bass sounds; high frequencies (e.g., 8000 Hz) affect treble sounds.

72