VLAN Commands

Forbidden VLANS:

VLAN Name

---- ----

73out

Port 29

Static configuration:

PVID: 2922

Ingress Filtering: Enabled

Acceptable Frame Type: Untagged

GVRP status: Disabled

map protocol protocols-group

The map protocol protocols-groupVLAN database command adds a special protocol to a named group of protocols, which may be used for protocol-based VLAN assignment. To delete a protocol from a group, use the no form of this command.

Syntax

map protocol protocol [encapsulation] protocols-group group

no map protocol protocol encapsulation

Parameters

protocol — The protocol is a protocol number or one of the reserved names. The format is Hex format.

encapsulation — One of the following values: ethernet, rfc1042, llcOther. If no option is indicated the default is ethernet.

group — Group number of group of protocols associated together. (Range: 1- 2147483647)

Default Configuration

This command has no default configuration.

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide

373

Page 389
Image 389
Intel SBCEGBESW10 CLI manual Map protocol protocols-group, Map protocol protocol encapsulation protocols-group group