Intel SBCEGBESW10 CLI Spanning-tree port-priority, Cost Path cost of the port Range 1-200,000,000

Spanning-Tree Commands

Parameters

•cost — Path cost of the port (Range: 1-200,000,000)

Default Configuration

Default path cost is determined by port speed and path cost method (long or short) as shown below:

Interface		Long	Short
Port-channel	20,000		4
Gigabit Ethernet (1000 Mbps)	20,000		4
Fast Ethernet (100 Mbps)	200,000		19
Ethernet (10 Mbps)	2,000,000		100

Command Modes

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

The path cost method is configured using the spanning-tree pathcost method Global Configuration mode command.

Example

The following example configures the spanning-tree cost on Ethernet port 15 to 35000.

Console(config)# interface ethernet ext.15

Console(config-if)# spanning-tree cost 35000

spanning-tree port-priority

The spanning-treeport-priorityInterface Configuration mode command configures port priority. To restore the default configuration, use the no form of this command.

Syntax

spanning-tree port-priority priority

no spanning-tree port-priority

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 265