Intel SBCEGBESW1 Sntp server, Polling is disabled, No sntp server host, No servers are defined

Clock Commands

Default Configuration

Polling is disabled.

Command Mode

Global Configuration mode

User Guidelines

Polling time is determined by the sntp client poll timer Global Configuration mode command.

Example

The following example enables polling for SNTP predefined unicast clients.

Console(config)# sntp unicast client poll

sntp server

The sntp server Global Configuration mode command configures the device to use the Simple Network Time Protocol (SNTP) to request and accept SNTP traffic from a specified server. To remove a server from the list of SNTP servers, use the no form of this command.

Syntax

sntp server {ip-address hostname}[poll] [key keyid]

no sntp server host

Parameters

•ip-address— IP address of the server.

•hostname — Hostname of the server. (Range: 1-158 characters)

•poll — Enable polling.

•keyid — Authentication key to use when sending packets to this peer. (Range:1- 4294967295)

Default Configuration

No servers are defined.

64 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide