Intel SBCEGBESW10 CLI manual Interface range ethernet port-listall, Shutdown No shutdown

Ethernet Configuration Commands

Syntax

interface range ethernet {port-listall}

Parameters

•port-list — List of valid ports. Where more than one port is listed, separate the nonconsecutive ports with a comma and no spaces, use a hyphen to designate a range of ports and group a list separated by commas in brackets.

•all — All Ethernet ports.

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode

User Guidelines

Commands under the interface range context are executed independently on each active interface in the range. If the command returns an error on one of the active interfaces, it does not stop executing commands on other active interfaces.

Example

The following example shows how ports 10 to 12 and 1 to 14 are grouped to receive the same command.

Console(config)# interface range ethernet 10-12,1-14

Console(config-if)#

shutdown

The shutdown Interface Configuration (Ethernet, port-channel) mode command disables an interface. To restart a disabled interface, use the no form of this command.

Syntax

shutdown

no shutdown

80 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide