Intel SBCEGBESW10 CLI manual Show dot1x users username username

	802.1x Commands
Field	Description
Username	The username representing the identity of the Supplicant. This field shows the
	username in case the port control is auto. If the port is Authorized, it shows the
	username of the current user. If the port is unauthorized it shows the last user
	that was authenticated successfully.
Quiet period	The number of seconds that the device remains in the quiet state following a
	failed authentication exchange (for example, the client provided an invalid
	password).
Tx period	The number of seconds that the device waits for a response to an Extensible
	Authentication Protocol (EAP)-request/identity frame from the client before
	resending the request.
Max req	The maximum number of times that the device sends an Extensible
	Authentication Protocol (EAP)-request frame (assuming that no response is
	received) to the client before restarting the authentication process.
Supplicant timeout	Time in seconds the switch waits for a response to an EAP-request frame from
	the client before resending the request.
Server timeout	Time in seconds the switch waits for a response from the authentication server
	before resending the request.
Session Time	The amount of time the user is logged in.
MAC address	The supplicant MAC address.
Authentication Method	The authentication method used to establish the session.
Termination Cause	The reason for the session termination.
State	The current value of the Authenticator PAE state machine and of the Backend
	state machine.
Authentication success	The number of times the state machine received a Success message from the
	Authentication Server.
Authentication fails	The number of times the state machine received a Failure message from the
	Authentication Server.

show dot1x users

The show dot1x users Privileged EXEC mode command displays active 802.1x authenticated users for the device.

Syntax

show dot1x users [username username]

Parameters

•username — Supplicant username (Range: 1-160 characters)

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 395