Intel SBCEGBESW10 CLI manual Enable password, No password is defined

AAA Commands

Parameters

•password — Password for this level. (Range: 1-159 characters)

•encrypted — Encrypted password to be entered, copied from another device configuration.

Default Configuration

No password is defined.

Command Mode

Line Configuration mode

User Guidelines

If a password is defined as encrypted, the required password length is 32 characters.

Example

The following example specifies the password called `secret' on a Telnet.

Console(config)# line console

Console(config-line)# password secret

enable password

The enable password Global Configuration mode command sets a local password to control access to user and privilege levels. To remove the password requirement, use the no form of this command.

Syntax

enable password [level level] password [encrypted]

no enable password [level level]

Parameters

•password — Password for this level. (Range: 1-159 characters)

•level — Level for which the password applies. If not specified the level is 15 (Range: 1-15).

•encrypted — Encrypted password entered, copied from another device configuration.

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 17