Intel SBCEGBESW10 CLI manual Set interface active, Following example reactivates interface

Ethernet Configuration Commands

User Guidelines

There are no user guidelines for this command.

Example

In the following example, the counters for interface 1 are cleared.

Console# clear counters ethernet ext.2

set interface active

The set interface active Privileged EXEC mode command reactivates an interface that was shutdown.

Syntax

set interface active {ethernet interface port-channel port-channel-number}

Parameters

•interface — Valid Ethernet port. (Full syntax: unit/port)

•port-channel-number — Valid port-channel number.

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC mode

User Guidelines

This command is used to activate interfaces that were configured to be active, but were shutdown by the system for some reason (e.g., port security).

Example

The following example reactivates interface 1.

Console# set interface active ethernet ext.1

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 89