Intel SBCEGBESW10 CLI manual Following example displays counters for Ethernet port

Ethernet Configuration Commands

The following example displays counters for Ethernet port 1.

Console# show interfaces counters ethernet ext.1

Port	InOctets	InUcastPkts	InMcastPkts	InBcastPkts
------	-----------	--------------	-----------	-----------
1	183892	0	0	0
Port	OutOctets	OutUcastPkts	OutMcastPkts	OutBcastPkts
------	-----------	--------------	------------	------------
1	9188	0	0	0

FCS Errors: 0

Single Collision Frames: 0

Late Collisions: 0

Excessive Collisions: 0

Oversize Packets: 0

Internal MAC Rx Errors: 0

Received Pause Frames: 0

Transmitted Pause Frames: 0

The following table describes the fields shown in the display.

Field	Description
InOctets	Counted received octets.
InUcastPkts	Counted received unicast packets.
InMcastPkts	Counted received multicast packets.
InBcastPkts	Counted received broadcast packets.
OutOctets	Counted transmitted octets.
OutUcastPkts	Counted transmitted unicast packets.
OutMcastPkts	Counted transmitted multicast packets.
OutBcastPkts	Counted transmitted broadcast packets.
FCS Errors	Counted received frames that are an integral number of octets in length but do
	not pass the FCS check.
Single Collision Frames	Counted frames that are involved in a single collision, and are subsequently
	transmitted successfully.
Late Collisions	Number of times that a collision is detected later than one slotTime into the
	transmission of a packet.
Excessive Collisions	Number of excessive collisions received on the selected interface.
Oversize Packets	Counted frames received that exceed the maximum permitted frame size.

96 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide