Intel SBCEGBESW1 manual Dot1x max-req count No dot1x max-req, Default number of times is

802.1x Commands

User Guidelines

The default value of this command should be changed only to adjust for unusual circumstances, such as unreliable links or specific behavioral problems with certain clients. and authentication servers

Example

The following command sets the number of seconds that the device waits for a response to an EAP-request/identity frame, to 3600 seconds.

Console(config)# interface ethernet ext.16

Console(config-if)# dot1x timeout tx-period3600

dot1x max-req

The dot1x max-reqInterface Configuration mode command sets the maximum number of times that the device sends an Extensible Authentication Protocol (EAP)-request/ identity frame (assuming that no response is received) to the client, before restarting the authentication process. To return to the default configuration, use the no form of this command.

Syntax

dot1x max-req count

no dot1x max-req

Parameters

•count — Number of times that the device sends an EAP-request/identity frame before restarting the authentication process. (Range: 1-10)

Default Configuration

The default number of times is 2.

Command Mode

Interface Configuration (Ethernet) mode

390Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide