Intel SBCEGBESW10 CLI manual Dot1x timeout supp-timeout, Default timeout period is 30 seconds

802.1x Commands

User Guidelines

The default value of this command should be changed only to adjust for unusual circumstances, such as unreliable links or specific behavioral problems with certain clients. and authentication servers

Example

The following example sets the number of times that the device sends an EAP-request/ identity frame to 6 .

Console(config)# interface ethernet ext.16

Console(config-if)# dot1x max-req6

dot1x timeout supp-timeout

The dot1x timeout supp-timeoutInterface Configuration mode command sets the time for the retransmission of an Extensible Authentication Protocol (EAP)-request frame to the client. To return to the default configuration, use the no form of this command.

Syntax

dot1x timeout supp-timeout seconds

no dot1x timeout supp-timeout

Parameters

•seconds — Time in seconds that the device waits for a response to an EAP-request frame from the client before resending the request. (Range: 1- 65535 seconds)

Default Configuration

Default timeout period is 30 seconds.

Command Mode

Interface configuration (Ethernet) mode

User Guidelines

The default value of this command should be changed only to adjust for unusual circumstances, such as unreliable links or specific behavioral problems with certain clients. and authentication servers

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 391