Intel SBCEGBESW10 CLI manual Show bridge address-table, No addresses are defined

Address Table Commands

Default Configuration

No addresses are defined.

Command Mode

Interface Configuration (Ethernet, port-channel) mode. Cannot be configured for a range of interfaces (range context).

User Guidelines

The command enables adding secure MAC addresses to a routed port in port security mode. The command is available when the port is a routed port and in port security mode. The address is deleted if the port exits the security mode or is not a routed port.

Example

In this example, the MAC-layer address 66:66:66:66:66:66 is added to port 1.

Console(config)# interface ethernet ext.1

Console(config-if)# port security routed secure-address66:66:66:66:66:66

show bridge address-table

The show bridge address-table Privileged EXEC mode command displays all entries in the bridge-forwarding database.

Syntax

show bridge address-table [vlan vlan] [ethernet interface port-channel port-channel- number address mac address]

Parameters

•vlan — Specifies a valid VLAN, such as VLAN 1.

•interface — A valid Ethernet port.

•port-channel-number — A valid port-channel number.

•mac address — A valid MAC address.

Default Configuration

This command has no default configuration.

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 31