Intel SBCEGBESW10 CLI manual Snmp Commands, Snmp-server community, No communities are defined

21SNMP Commands

snmp-server community

The snmp-server community Global Configuration mode command configures the community access string to permit access to the SNMP protocol. To remove the specified community string, use the no form of this command.

Syntax

snmp-server community community [ro rw su] [ip-address] [view view-name]

snmp-server community-group community group-name[ip-address] [type {router oob}]

no snmp-server community community [ip-address]

Parameters

•community — Community string that acts like a password and permits access to the SNMP protocol.

(Range: 1-20 characters)

•ro — Indicates read-only access (default).

•rw — Indicates read-write access.

•su — Indicates SNMP administrator access.

•ip-address— Specifies the IP address of the management station.

•group-name— Specifies the name of a previously defined group. A group defines the objects available to the community. (Range: 1-30 characters)

•view-name— Specifies the name of a previously defined view. The view defines the objects available to the community. (Range: 1-30 characters).

Default Configuration

No communities are defined.

Command Mode

Global Configuration mode

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 237